Disassembly
Removing and Replacing the Volume / Smart and Voice Buttons
Removing and Replacing the Microphone
G
26
1.
Remove battery housing, battery, antenna, rear chassis assembly, and trans-
ceiver board assembly as described in the procedures.
2.
Using the plastic tweezers, lift the volume / smart buttons and the voice button
from the transceiver board assembly. See Figure 13.
TRANSCEIVER BOARD ASSEMBLY
VOICE
BUTTON
PLASTIC TWEEZERS
Figure 13. Removing the volume / smart and voice buttons
3.
To replace, set the volume / smart buttons and the voice button onto the
corresponding transceiver board switches.
4.
Replace the transceiver board assembly, rear chassis assembly, antenna,
battery, and battery housing as described in the procedures.
1.
Remove the battery housing, battery, antenna, rear chassis assembly, and
transceiver board assembly as described in the procedures.
The wire leads on the microphone are easily bent or broken. Exercise care when
handling.
V. Series 60g
SMART / VOLUME
BUTTONS
010633o
6881038B35