Table of Contents
Advertisement
Level III Service Manual
Replacing the Volume / Smart Buttons
6881037B20
3.
Carefully lift the rubber volume / smart button from the front housing as shown
in Figure 15B.
A
Figure 15. Removing and Replacing the Volume/Smart Buttons
Reverse the volume / smart button removal process as follows:
1.
Align the smart button with the recessed area on the front housing (see
Figure 15B).
2.
Carefully insert the rubber connector (between the volume buttons and smart
button) into the recessed area surrounding the screw post on the front housing.
The disassembly tool may be required to ensure that the rubber connector is fully
seated in the recessed area surrounding the screw post.
3.
Insert the volume button into the opening on the face of the front housing.
4.
Replace the controller board, board to board spacer, transceiver board, back
housing, SIM card, battery, and battery door as described in the procedures.
WEB
VOLUME
BUTTON
B
Disassembly
SMART
BUTTON
001011-O
29
Advertisement
Table of Contents
Troubleshooting
