Tektronix VM5000 Programming Manual page 689

NoisePassIrCh[1..3]?
Syntax
Group
Arguments
Return value
Examples
VM5000 Automatic Video Measurement Set Programmer Manual
Query the pass/fail status of the Inj Ratio resulting from the Noise Inj Ratio
measurement on the specified channel.
VARIable:VALue? "NoisePassIrCh1"
VARIable:VALue? "NoisePassIrCh2"
VARIable:VALue? "NoisePassIrCh3"
Pass/Fail Status Query
None
Query returns the pass/fail status of the Inj Ratio resulting from the
Noise Inj Ratio measurement on the specified channel.
A returned value of 1 means Pass, a returned value of 0 means Fail.
Returns "- -- -- -" if no valid value is currently available.
VARIable:VALue? "NoisePassIrCh1"
Query may return: "NoisePassIrCh1 1"
Option VGA Remote Commands
3- 485