Planar PD8130 Installation And Operation Manual page 64

Operation
Table 4-3. x/y Color Gamut Values (continued)
Primary
REC709
Color
x
Cyan 0.225
Blue 0.150
Magenta 0.321
Brilliant Color™: Select Brilliant Color™ from the Advanced menu to enable
(On) or disable (Off) BrilliantColor processing, which improves brightness in grays
and secondary colors by using the spoke light from the color wheel.
DynamicBlack: Select DynamicBlack from the Advanced menu to enable (On)
or disable (Off) the DynamicBlack actuator in the optical engine. DynamicBlack
uses a dynamic iris that modulates light to the DMD based on the actual
content of the video material. Planar recommends that you disable
DynamicBlack before adjusting Brightness, Contrast or other image settings.
Adaptive Contrast: Adaptive Contrast enhancement expands the light and
dark portions of an output image according to the mean luminance of the
input image.
RGB Adjust: To remove any trace of color from the white areas of the projected
image, choose RGB Adjust from the Advanced menu and press ENTER. This
displays the RGB Adjust sub-menu, shown in Figure 4-9.
Figure 4-9. RGB Adjust Sub-Menu
Color Gamut Settings and Associated x/y Values
SMPTE "C"
y x
0.329 0.228
0.060 0.155
0.154 0.318
50 Planar PD8130/PD8150 Installation/Operation Manual
EBU
y x
0.326 0.220
0.070 0.150
0.162 0.328
y
0.329
0.060
0.158