Connecting 12-Volt Trigger Output To External Theater Equipment; Connecting An External Ir Receiver - Planar PD8130 Installation And Operation Manual

Installation
Connecting 12-Volt
Trigger Output to External
Theater Equipment
Connecting an External IR
Receiver
If your home theater contains a retractable screen, screen mask or other 12-volt
➤
trigger-activated equipment, connect it to the 12-volt trigger output(s) as
shown in Figure 3-12.
Retractable Screen or other
12-volt trigger-activated
device
Figure 3-12. 12-Volt Trigger Output Connection
If infrared signals from the remote control cannot reach the projector due to
➤
excessive distance or obstructions such as walls or cabinet doors, you can
connect an external IR repeater system to the IR INPUT on the PD8130/PD8150 to
extend the range of the remote control. See Figure 3-13.
(3.5-mm, mini
phono plug)
Figure 3-13. External IR Receiver Connection
Sleeve = Ground
Tip = +12V
IR Sensor
IR Repeater
28 Planar PD8130/PD8150 Installation/Operation Manual
Remote Control