Operation; Selecting Video Memory; Selecting An Aspect Ratio; Selecting An Input Source - Planar PD8130 Installation And Operation Manual

Press M1, M2 or M3 to recall settings from a memory preset. Then, press ENTER to
confirm your selection. Or, to cancel the operation, press
and press ENTER.
You can assign each of these three buttons to any
of four memory presets. For more information, refer
to M1 Key / M2 Key / M3 Key on page 57.
Press the aspect ratio (
type of program material being viewed.
When you turn on the PD8130/PD8150, it switches
to the last selected input and looks for a valid
signal.
Use these buttons on the remote control to select
an input source directly. You can assign each of
these five buttons to any input. The default
assignments are: 1 = HDMI 1, 2 = HDMI 2,
3 = Component 1, 4 = S-Video, 5 = Video.
For more information, refer to 1 Key / 2 Key / 3 Key / 4 Key / 5 Key on page 57.
Planar PD8130/PD8150 Installation/Operation Manual
) button to select the appropriate aspect ratio for the
to select Cancel
USER MEMORY
M1 M2 M3
SHARP
SOURCE
1 2 3
4 5
▲
33

Operation

Operation
4.
4.1

Selecting Video Memory

4.2
Selecting an Aspect
Ratio
4.3
Selecting An Input
Source