Planar PD8130 Installation And Operation Manual page 45

Installation
2. Carefully lift the badge up, then
away from the projector.
Vertical Lens Shift: To shift the projected
image vertically, insert the provided hex
wrench into the hole at the top of the
projector (directly above the lens). Then,
turn the wrench as shown to shift the lens
in the desired direction.
Horizontal Lens Shift (PD8150 only): To
shift the projected image horizontally,
insert the provided hex wrench into the
hole at the top of the projector. Then,
turn the wrench as shown to shift the lens
in the desired direction.
Planar PD8130/PD8150 Installation/Operation Manual 31