Connections To The Pd8130/Pd8150; Connector Panel Access - Planar PD8130 Installation And Operation Manual

Installation
3.5
Connections to the
PD8130/PD8150

Connector Panel Access

Proceed as follows to connect the PD8130/PD8150 to your video sources,
external controller(s) – if present – and AC power.
When connecting your equipment:
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
Using a flat-blade screwdriver, loosen
➤
the two screws holding the rear
compartment cover in place.
Then, remove the rear compartment
cover by tilting it upward.
22 Planar PD8130/PD8150 Installation/Operation Manual