Exercise caution when using this antenna. Operate this antenna at your own risk. All information on this product and the product itself is the property of and is proprietary to Chameleon Antenna . Specifications are subject to change without prior notice. CHA P-LOOP 2.0 Page 2...
We’re sure you will be amazed by the performance and agree that the CHA P-LOOP 2.0 is the most advanced portable magnetic loop antenna available today.
The CHA P-LOOP 2.0, see plate (1), is comprised of a 33¾ inch diameter flexible radiator loop, a rigid coupling loop, a telescoping mast with handle and tripod mount, a specially designed tuning unit, and coaxial feed line – all of which fit in the supplied Olive colored classic military-style messenger bag.
A magnetic loop antenna radiates at all angles from horizon to zenith, making it an equally effective antenna for both local and long-distance (DX) communication. While not specifically designed for NVIS, during field testing of the CHA P-LOOP 2.0, several NVIS contacts were made on the 40 meter ham band during the day. Parts of the Antenna The CHA P-LOOP 2.0 is comprised of the following assemblies and components, see plates (2) through (4):...
Page 6
Coaxial Cable Assembly The Coaxial Cable Assembly (not shown) is a 12 foot length of coaxial cable, with an RF isolator at the antenna end, used to connect the CHA P-LOOP 2.0 Antenna to your radio set. h. Tuning Knob The Tuning Knob is located on the bottom of the Tuning Unit (a) and is used to adjust the resonant frequency of the loop.
Page 7
Coaxial Cable (g) to the radio. Mast Handle The Mast Handle is at the bottom of the Telescoping Mast (d). It can be used to hold the CHA P-LOOP 2.0 in your hand for true man-portable operation. Plate 3. Tuning Box and Telescoping Mast Assemblies.
Loop Assembly The CHA P-LOOP 2.0 antenna is easy to assemble. The antenna should be located near the radio set and can be installed either indoors or outside. The CHA P-LOOP 2.0 is weather resistant to dripping water when mounted near vertically.
Page 9
Perform the following steps to assemble the Portable Loop Antenna, see plates (2) through (4). 1. Select a location to setup the CHA P-LOOP 2.0 antenna. The location can be indoors or outside, but should facilitate accessibility by the operator to the Tuning Knob (h). The operator needs to be able to adjust the Tuning Knob while listening to the receiver, activating the transmitter, and observing the SWR meter.
Table (1) on the band for which you are operating. For example, on 20 meters, you should retune if you change frequency greater than 20 KHz. 1. The CHA P-LOOP 2.0 is bidirectional favoring the sides, see plate (5). If possible, point one side toward the target signal and rotate the antenna for maximum signal strength.
9. If still not operational, contact us for technical support. Preventive Maintenance Like all of our products, the CHA P-LOOP 2.0 is built to be rugged, long lasting and with details in mind. The craftsmanship of the system is unique to Chameleon Antenna .
7. Dropping or rough handling the Power Compensator will permanently damage the internal components. This damage is not covered by the warranty. Accessories The following accessories are available for purchase from Chameleon Antenna Please contact us at support@chameleonantenna.com for current prices and availability.
Chameleon Antenna Products The following products are available for purchase at Chameleon Antenna Go to http://chameleonantenna.com for ordering and more information. CHA FT-817 BRACKETS 2.0 – CHA FT-817 Brackets CHA V1L Mobile Antenna - The CHA V1L antenna is a...
Whip and a CHA HYBRID-MINI Base perfectly CHA TD Tactical Dipole - The CHA TD is a complete complements the capability of the CHA P-LOOP 2.0. multi-configurable HF broadband antenna system specially designed for portable HF communication CHA MIL EXT Whip Extension - The CHA MIL EXT...