Specific Safety Instructions - King Canada 9999 ITM Instruction Manual

SPECIFIC SAFETY INSTRUCTIONS

Please read and understand this entire manual before attempting to
assemble, operate or install the product.
Work Area
Do not operate snow thrower in an explosive atmosphere, such as in
the presence of flammable liquids, gases, or dust. Electrical appliances
create sparks that may ignite the dust or fumes.
Electrical Safety
1. Electrical plugs must match the outlet. Never modify the plug in any
way. Do not use any adaptor plugs with grounded appliances.
Unmodified plugs and matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges, and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
3. Do not abuse the cord. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords increase the risk of
electric shock. Never carry the snow thrower by its cord or yank the
cord to disconnect it from the electrical outlet.
4. Replace or properly repair damaged cords. If cord is damaged in any
manner while plugged in, pull the extension cord from the wall receptacle.
5. Contact with water while operating the snow thrower can result in
electric shock and serious bodily injury. Do not use the snow thrower in
damp or wet locations or expose to rain. Do not handle the plug or the
appliance with wet hands or while standing in water.
6. Extension Cord - WARNING - Only use a UL-rated extension cord
for OUTDOOR, all-weather use (usually orange color).
7. Turn off the power switch and disconnect the power cable before
inspecting, servicing, repairing, or cleaning the snow thrower. Any such
operation should be performed after revolving parts inside the snow
thrower stop completely.
8. Do not move or transport the snow thrower when the plug is
connected to the power source and the switch is turned on.
Personal Safety
1. Stay alert - Watch what you are doing and use common sense when
operating the snow thrower. Do not use the machine when tired, ill, or
under the influence of drugs, alcohol, or medication. A moment of
inattention may result in serious personal injury.
2. Wear proper clothing - Do not wear loose clothing or jewelry that may
become caught in the machine. Wear protective headgear to keep hair
away from revolving parts of the machine.
3. Moving parts present risks - Keep your face, hair, clothing, hands
and feet away from moving parts. Shut off and disconnect cord before
touching any parts other than the handles and switch.
4. Surfaces - This snow thrower is intended for use on paved surfaces.
Do not use on gravel, stone, or other unpaved surfaces.
5. Avoid accidental starting - Make sure the switch is in the off position
before plugging in the unit. Do not carry the snow thrower with your
finger on the switch.
6. Body position - Maintain proper footing and balance at all times.
Place heels firmly on the ground and tightly grasp the handle bar.
Watch for uneven surfaces and do not overreach. In case you fall
or collide with the snow thrower, inspect the unit for damage.
SPECIFIC SAFETY INSTRUCTIONS
FOR ELECTRIC SNOW THROWERS
Snow thrower Use and Care
1. Know your snow thrower - Familiarize yourself with the main parts of
your snow thrower. Read instruction manual carefully. Learn your snow
thrower's applications and limitations as well as the specific potential
hazards related to this machine. Do not use this machine for any
purpose other than the one for which it was designed. Otherwise, it
may cause mechanical defaults, serious damage or personal injury.
2. Preliminary unit inspection - Thoroughly inspect the unit before use.
Make sure all the parts are secure and installed correctly. If you notice
any abnormalities, do not use the machine until it has been properly
repaired. Always perform a test run the first time you use the snow
thrower or after replacing parts to ensure that the unit is functioning
properly.
3. Preliminary area inspection - Clear the area to be plowed before
each use. Remove all objects such as rocks, broken glass, nails, wire,
or string, which can be thrown by or become entangled in the snow
thrower. Keep the area of operation clear of other people and pets.
4. Excessive force - The snow thrower was designed to respond at a
certain rate for various snow conditions for optimum safety and
performance. Do not force it; keep pressure constant.
5. Malfunctioning switch - Do not use the snow thrower if the switch
does not turn it on and off. Any electrical appliance that cannot be
controlled by the switch is not safe to use and must be repaired.
6. Hitting an object - If the snow thrower accidentally strikes an object,
stop the snow thrower; inspect for damage; repair or replace any
damaged part before restarting and operating the snow thrower.
7. Discharge chute safety - Never direct the snow discharge chute at
the operator, at bystanders, at vehicles or at windows. Thrown snow
and foreign objects accidentally picked up by the snow thrower can
cause serious damage and personal injury. Do not use your hands to
unclog the discharge chute, use the supplied small snow shovel. Stop
the motor before removing debris.
8. Store safely - Store snow thrower indoors in a dry area between
uses. Keep in a locked area where children and unauthorized users
cannot gain access. Do not store the machine while it is still connected
to the power source. It may cause damage and injury.