Fisher 2500 Series Instruction Manual page 4

Level-trol controllers and transmitters
Hide thumbs Also See for 2500 Series:
Table of Contents

Advertisement

Type 2500
Typical Ambient Temperature Operating Influence
Output pressure changes
(10 C)change in temperature at 100% proportional
band when using a standard wall torque tube with
249 Series sensors.
1. Controllers are field adjustable between direct or reverse action. The letter R in the type number indicates that the controller/transmitter shipped from the factory set for reverse action (see
changing controller action procedures). The letter C in the type number indicates that a pointer is attached to the torque tube shaft providing visual monitoring of torque tube motion.
2. This term is defined in ISA Standard S51.1-1979.
3. Control and stability may be impaired if the maximum pressures are exceeded.
4. Adjusting the span of the differential gap controller is equivalent to adjusting the deadband.
5. These statements apply only to units sized to produce a full output change for a 100% level change at the maximum proportional band dial setting.
SENSOR TYPE
249, 249B, 249BP, 249K, 249N
249C, 249CP
249L
249V
1. With standard 12-inch (305 mm) flange-face-to-displacer centerline dimension only.
OUTPUT SIGNAL RANGE
3 to 15 psig (0.2 to 1 bar)
6 to 30 psig (0.4 to 2 bar)
1. Consult your Fisher Controls representative about gauges in other units.
2. Control and stability may be impaired if this pressure is exceeded.
3. At zero or maximum proportional band or specific gravity setting.
4. At setting in middle of proportional band or specific gravity range.
5. If air consumption is desired in normal m
4
Table 1. Specifications (Continued)
1.5% per 50 F
Table 2. Standard Displacer Volumes
Table 3. Supply Pressure Data
STANDARD SUPPLY
NORMAL OPERATING
AND OUTPUT
SUPPLY PRESSURE
PRESSURE GAUGE
PRESSURE GAUGE
(1)
(1)
INDICATIONS
Psig
0 to 30 psig
20
0 to 60 psig
35
3
/hr at 0 C and 1.01325 bar, multiply scfh by 0.0258.
Supply and Output Connections
1/4-inch NPT female
Maximum Working Pressure (sensors only)
Refer to the appropriate sensor instruction manual.
STANDARD VOLUME,
Cubic Inches
100
60
120
(1)
80
AIR CONSUMPTION AT
NORMAL OPERATING
(2)
SUPPLY PRESSURE
Bar
Minimum
1.4
4.2 scfh
2.4
7 scfh
STANDARD VOLUME,
Liters
1.6
1.0
1.9
(1)
1.3
SUPPLY PRESSURE
SUPPLY PRESSURE
(3)
(4)
Maximum
(5)
(5)
27 scfh
(5)
(5)
42 scfh
MAXIMUM
45 psig (3 bar)
45 psig (3 bar)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents