Table of Contents
Advertisement
8
Switch the SSID of the computer or smartphone to the SSID dis-
.
played on the screen of the display or projector.
• For the procedure for switching the SSID, see steps
the previous page.
9
Input the URL displayed on the screen of the display or projector
.
into the web browser.
8
NOTE: Perform steps
operation is performed within 3 minutes, start over from step
the previous page.
▸ ▸
NOTE
• It may take some time for the URL to be displayed, depend-
ing on the access point to which you are connecting.
• If there are mistakes in the infrastructure settings that were
input, connection of the access point and MultiPresenter
Stick may fail and the URL may not be displayed.
When the screen shown at the right appears, the MultiPresenter
Stick's initial settings are completed.
10
Click "Move to the start-up screen" on the web browser screen
.
shown on the right in step
The web server screen appears.
Proceed to "4-3. Preparing the MultiPresenter application" on the
next page.
The screen at the right is referred to as the MultiPresenter Stick's
start-up screen.
9
and
within 3 minutes of each other. If no
9
.
1
2
and
on
SSID
URL
Screen on the display or projector
1
on
Screen on the display or projector
11
Advertisement
Table of Contents
