Updating The Firmware Version - NEC DS1-MP10RX series Operation Manual

The MultiPresenter Stick's firmware version can be updated to the latest version by selecting [ADMINISTRATOR MENU] →
[FIRMWARE] on the web server screen.
▸ ▸
IMPORTANT
• Do not turn off the power of the MultiPresenter Stick or the computer you are using while the firmware is being up-
dated.
• Do not refresh the page on your web browser's computer while the firmware is being updated.
1
Check the MultiPresenter Stick's firmware version number.
.
The version number is displayed in the lower right of the
MultiPresenter Stick's start-up screen.
▸ ▸
NOTE
• For firmware version numbers early than "1.01", the
version number is not display on the start-up screen.
2
Use a web browser on a computer to access the NEC down-
.
load page.
• URL: http://www.nec-display.com/dl/en/soft/multipresenter/mp10rx/eula.html
3
On the download page, check whether the MultiPresenter
.
Stick's firmware has been updated.
4
If the firmware has been updated, save the firmware update
.
file (e.g.: DS1-MP10RX_FIRM_Vxxxxxx.BIN) to any folder on
your computer.
5
Connect your computer to the MultiPresenter Stick over the
.
network and display the web server screen.
6
Select the [SETTINGS] tab → [ADMINISTRATOR MENU] →
.
[FIRMWARE].
A screen for updating the firmware is displayed.
7
Click [START UPDATING...] in the lower right of the firmware
.
screen.
The firmware select window is displayed.

8-3. Updating the firmware version

36