Advertisement
ADJUSTME TS
⚠
arninge!
Before riding, always make sure that the basic settings
made by Öhlins are according to recommended Set-
up Data. Read about adjustments and setting up in
the Öhlins Owner's Manual before you make any
adjustments. Contact an Öhlins dealer if you have any
questions about setting up.
SETUP DATA
Length
Stroke
Rebound
Spring preload
Spring
Spring length
Spring rate
Öhlins products are subject to
continuous improvement and
development, therefore, although
these instructions include the most
up-to-date information available at
the time of printing, minor updates
may occur.
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written
permission of Öhlins Racing AB
is prohibited.
329
/
mm
+5
-5
77
mm
16
clicks
10
mm
00280-21
200
mm
25
N/mm
To find the latest information
contact an Öhlins distributor.
Please contact Öhlins if you have
any questions regarding the
contents in this document.
Part no. MI_HD159_2
S-194 27 Upplands Väsby, Sweden
Phone +46 8 590 025 00
Spring
preload
adjuster
Length
adjuster
Issued 2014-03-11
Öhlins Racing AB
Box 722
fax +46 8 590 025 80
Rebound
damping
adjuster
Advertisement
