Page 1
Before installing this product, check the contents of the kit. If anything is missing, please check an Öhlins dealer. Kit Contents Description Part No Shock absorber HO 819 Tool preload adjuster 03199-03 Sticker set "ÖHLINS" 10207-01 Owners manual road & track 07241-02...
Page 2
MOUNTING INSTRUCTIONS Note! Warning! Before mounting this product clean the vehicle It is advisable to have an Öhlins dealer install the shock thoroughly. absorber. Note! Warning! When working on this product, always see the Vehicle If working on a raised vehicle, ensure it is securely Service Manual for vehicle specific procedures and supported so that it will not tip over.
Page 3
MOUNTING INSTRUCTIONS Install the Öhlins shock absorber by tightening ①② the upper and lower mounting bolts Tighten at a torque value as specified in the vehicle service manual. Reverse all procedures as necessary. Note! Lower the vehicle so that the suspension is slightly compressed before tightening the screws.
Page 4
ADJUSTMENTS Warning! Before riding, always make sure that the basic settings made by Öhlins are according to recommended Set-up Data. Read about adjustments and setting up Compression in the Öhlins Owner’s Manual before you make any Adjuster adjustments. Contact an Öhlins dealer if you have any Spring Preload questions about setting up.