Ohlins HO 1072 Mounting Instructions

Adjustments
Warning!
Before riding, always make sure that the
basic settings made by Öhlins are according
to recommended Set-up Data. Read about
adjustments and setting up in the Öhlins
Owner's Manual before you make any
adjustments. Contact an Öhlins dealer if you
have any questions about setting up the shock
absorber.
Set-up Data
Recommended set-up
Rebound 10 clicks
Compression 10 clicks
Spring Preload 1 mm
CSC 24 clicks
Shock Absorber Data
Length 388 mm
Stroke 110 mm
Free Sag and Ride Height
Free sag, front 60±5 mm
2½±¼''
Free sag, rear 30±5 mm
1¼±¼''
Ride height, front 80±5 mm
3¼±¼''
Ride height, rear 105±5 mm
4½±¼''
Öhlins products are subject to
To find the latest information contact
continuous improvement and your Öhlins distributor. Please
development, therefore, although
consult your Öhlins dealer if you
these instructions include the most
have any questions regarding the
up-to-date information available at
the time of printing, minor updates
may occur.
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written S-194 27 Upplands Väsby, Sweden
permission of Öhlins Racing AB
is prohibited.
Compression
Damping Adjuster
Rebound
Damping Adjuster
Spring Preload
Adjuster
CSC
Spring Guide
Rider's weight Spring Rate
75kg/ 165 lbs 06320-08 48N/mm
85kg/ 187 lbs 06320-09 50N/mm
95kg/ 209 lbs 06320-11 54N/mm
contents in this document.
Part no. HO1072_0
Issued 2010-04-15
Öhlins Racing AB
Box 722
Phone +46 8 590 025 00
fax +46 8 590 025 80
www.ohlins.com
Shock Absorber for Honda TRX 450 - rear
HO 1072
Mounting Instructions
Before installing this product, check the
contents of the kit. If anything is missing, please
contact an Öhlins dealer.
Kit Contents
Part No. Pcs.
Shock absorber HO1072 1
C-spanner 00710-02 1
Spring clip 00516-01 1
Spring adapter 00543-05 1
Sticker 00191-23 2
Öhlins Sticker 00197-01 2
Memo Notes Sticker 01180-01 1
General Info Sheet TTX 01198-01 1
Owner's Manual ATV 07235-01 1
Note!
No spring included in this kit. See spring
recommendation in this folder. Consult an Öhlins
dealer for advice.
Please note that during storage
transportation, especially at high ambient
temperature, some of the oil and grease used for
assembling may leak and stain the packaging.
This is in no way detrimental to the product,
wipe off the excessive oil/grease with a cloth.
Warning!
Before installing this product, read the Öhlins
Owner's Manual. The shock absorber is an
important part of your vehicle and will affect the
stability.
and