Timer - Miele KM 6310 Operating And Installation Instructions

Timer

The cooktop has to be turned on if
you wish to use the timer.
You can set a time between 1 minute
() and 9 hours (.).
The timer can be used for two different
functions:
– for setting the timer
– for turning off a cooking zone
automatically.
A time up to 99 minutes is set and
displayed in minutes:
In case of a time of more than 99
minutes, the timer must be switched to
hours (h). The time is set in half-hour
steps. Half-hours are indicated by a dot
following the number, for example, 2 h
30 min:
h
32
Timer
Setting the minutes
Example: You want to set a time of 15
minutes.
 Turn the cooktop on.
 Touch the  sensor button.
 appears in the timer display, and the
right  flashes.
First the tens digit is set then the ones
digit.
 Tap the sensor button on the control
scale that corresponds to the tens
position (1 in this case).
The timer display will change and  will
start flashing on the right.
 Tap the sensor button on the control
scale that corresponds to the ones
position (5 in this case).
The timer display will change.  jumps
to the left and  appears on the right.
After a few seconds the timer display
will light up continuously. The minute
minder time will begin to count down