Miele KM 6310 Operating And Installation Instructions page 62

Electrical connection
Connection
 Ensure that the connection data on
the data plate (voltage, frequency,
and fuse rating) match those of your
electrical supply.
The data plate is located underneath
the cooktop.
The cooktop is approved and ready for
connection to a grounded connector
with three connecting wires, sheathed
by a flexible metal hose.
It must be connected to an assigned
line in an approved connecting socket.
The appliance must be able to be
disconnected from the power supply on
all poles by disconnecting devices!
(When turned off, a contact distance of
at least 3 mm must be present!) The
disconnecting devices are overcurrent
protection elements and protective
circuit breakers.
Black: Connect to L1 (hot)
Red: Connect to L2 (hot)
Green: Connect to GND (ground)
208/240 V, 60 Hz, 40 A
62
Make sure that the connecting socket is
accessible after the installation of the
cooktop.
Further information can be found on the
included data plate.

WARNING:
THIS COOKTOP MUST BE
GROUNDED