Applications; Pneumatic Conveyor; Screw Conveyor Discharge; Diverter Gate - Siemens AS 100 Instruction Manual
Hide thumbs
Also See for AS 100:
- Operating instructions manual (34 pages) ,
- Operating instructions manual (27 pages)
Table of Contents
Advertisement
Applications
Pneumatic Conveyor
A tanker load of bulk solid material is being
pneumatically conveyed into a silo. The Sensor
detects the acoustic emissions generated by the
particles impacting against the pipe wall and the
output is used to activate the silo dust filter
system.
Recommended location is
any impact point along
the line, such as an
elbow.
Diverter Gate
The process material is stored in a hopper
and fed into the process through a diverter
gate. A Sensor mounted to each leg of the
diverter indicates the presence or absence
of flow in the open leg. Low alarm gives
early indication of problems in the diverter
gate or slide gate, or of blockage or mate-
rial shortage in the hopper.
7ML19985DM02
Screw Conveyor Discharge
A fibrous material is being delivered to a pelletiser by
means of a screw feeder. When loss of flow is
detected by the Sensor, an alarm in the control room
informs the operator of a possible blockage.
Recommended location is any point along the under
side of chute, where there is friction due to the flow
of material.
SITRANS AS 100 – INSTRUCTION MANUAL
Page 11
Advertisement
Table of Contents
