Download  Print this page

Mounting - Siemens AS 100 Instruction Manual

Hide thumbs

Advertisement

Mounting

Notes:
To ensure the most ideal location, test the SITRANS AS 100 by clamping the
Sensor to the application, and running a trial period to determine the system's
performance. The acoustic emission level can be monitored by a voltmeter
across the analog output. Refer to Interconnection on page
9.
Coating the contact surfaces with grease enhances the propagation of
acoustic emissions to the Sensor.
Mounting Method
Clearance hole
Drill and Tap
Mounting Disc
Extension Tab
Direct Mounting
Clearance Hole
Insert mounting post through hole in
device being monitored and fasten
with customer-supplied washers
and nut.
: To ensure proper coupling, the face of the Sensor nut must be tight to the
Note
application surface.
7ML19985DM02
SITRANS AS 100 – INSTRUCTION MANUAL
Acoustic Coupling and Sensitivity
Good
Good
Good
Fair
Drill and Tap
Screw mounting post into threaded hole in
device being monitored.
Page 7

Advertisement

Table of Contents
loading

  Also See for Siemens AS 100

  Related Manuals for Siemens AS 100

This manual is also suitable for:

Sitrans