Maintenance Tips
Do not put or install the product near a heat source or under direct sunlight,
●
or in dusty or humid places, or somewhere the product may be hit or
damaged by mechanical vibration. To maximize the performance, it needs
to be put away from equipment such as grids, large metal objects and radar
stations as far as possible.
Do not wipe the panel with any chemical agent. Solvents may damage the
●
enclosure or paint. If the panel is stained by dust, cut off the power and then
clean the panel using a dried cloth with a little of warm water. Use a clean
soft cloth to clean the LED of the panel.
Do not frequently switch on and off the product, which may shorten the
●
product service life. After the panel is switched off, wait for three minutes
before switching it on again. If the product is not to be used for a long period
of time, please power off the product and pull out the power plug.
Do not maximize the brightness and contrast of the LED for a long period of
●
time, which may shorten the LED service life.
Do not use a hard object to write on the touchscreen, this may scratch
●
the LED.
44