Software Uninstall; Software Calibration - Genee World G-Touch T15 Classic User Manual

Step 3: Double click the
installation of the touch LED display software.
Step 4: The computer needs to restart to activate the software after
installation is completed. Save all the files in the computer and restart.

Software Uninstall

If you determine to uninstall Teach Infinity Pro from your computer, choose
Control Panel > Programs > Programs and Features to uninstall the
programme, as shown in the following figure.

Software Calibration

To work normally, the handwriting of the projected image on the touch LED
display should coincide with the actual one to calibrate accurately. The
following situations need calibration.
When you first use the interactive LED panel.
●
Re-install of the drive program.
●
Connecting the panel to another PC.
●
The handwriting display uses a nine-point positioning method. The
positioning process is as follows:
Step 1: Connect the panel and run the drive program.
Step 2: Click the handwriting drive icon on the right bottom of the panel to
show the following image.
, follow the instructions and complete the
１３