Serial Port Control - Genee World G-Touch T15 Classic User Manual

Serial Port Control

The RS-232 port of the interactive panel is defined as follows:
Connect RS-232 port to the PC or controlling device. Enable RS-232 serial port
connection and complete the following configuration.
Port: COM1 (Set according to PC or controlling device's port number)
Bit rate
Data bits
The following table lists button controlling codes. The buttons share same
functions with corresponding buttons on the remote controller:
Function Controlling codes
7F 08 99 A2 B3 C4 02
Power on
FF 01 00 CF
7F 08 99 A2 B3 C4 02
Mute
FF 01 02 CF
Signal 7F 08 99 A2 B3 C4 02
source FF 01 06 CF
Display 7F 08 99 A2 B3 C4 02
status FF 01 09 CF
7F 08 99 A2 B3 C4 02
HD 2
FF 01 0B CF
OPS 7F 08 99 A2 B3 C4 02
computer FF 01 38 CF
19200
8
３６
Odd/even check
Stop bit
Function Controlling codes
7F 08 99 A2 B3 C4 02
Power off
FF 01 01 CF
7F 08 99 A2 B3 C4 02
Sound mode
FF 01 05 CF
7F 08 99 A2 B3 C4 02
HD 1
FF 01 0A CF
7F 08 99 A2 B3 C4 02
HD 3
FF 01 0C CF
7F 08 99 A2 B3 C4 02
Computer
FF 01 0D CF
7F 08 99 A2 B3 C4 02
YPbPr
FF 01 10 CF
None
1