Wi-Fi Setup For Ac2889 - Philips AC2885 User Manual

Wi-Fi setup for AC2889

Setting up the Wi-Fi connection
for the first time
1
Download and install the 'Air
Matters' App developed by
FreshIdeas Studio from the App
Store or Google Play.
2
Put the plug of the air purifier in the
wall outlet and touch
the air purifier.
» The Wi-Fi indicator
displayed on the screen when
using the air purifier for the first
time.
3
Touch and
3 seconds until you hear a beep.
» The air purifier goes to pairing
mode.
» The Wi-Fi indicator
orange.
4
Make sure that your mobile device
is successfully connected to your
Wi-Fi network.
5
Launch the 'Air Matters' App and
follow the onscreen instructions
to connect the air purifier to your
network.
6
After the successful pairing and
connection, the Wi-Fi indicator
will light up white. If pairing
is not successful, consult the
troubleshooting section, or the
help section in the 'Air Matters'
App for extensive and up-to-date
troubleshooting tips.
10 EN
to turn on
is not
simultaneously for
blinks
Note
• This instruction is only valid when the
air purifier is being set up for the first
time. If the network has changed or the
setup needs to be performed again,
consult section "Setting up the Wi-Fi
connection when the network has
changed" on page 10.
• You cannot set up two air purifiers at
the same time. If you want to set up
more than one air purifier, you can only
do it successively.
• Make sure that the distance between
your mobile device and the air purifier
is less than 33 ft/10 m without any
obstructions.
• This App supports Android 4.4 version
and above or iOS 9.0 version and
above.
Setting up the Wi-Fi connection
when the network has changed
Note
• This applies when your default network
connected with your air purifier has
changed.
1
Put the plug of the air purifier in the
wall outlet and touch
the air purifier.
» The Wi-Fi indicator
white.
2
Touch and
3 seconds until you hear a beep.
» The air purifier goes to pairing
mode.
» The Wi-Fi indicator
orange.
3
Enter your Wi-Fi network name
and password in the App on your
mobile device. The network name
and password are case-sensitive.
4
Follow the steps 5-6 in "Setting up
the Wi-Fi connection for the first
time" section.
to turn on
blinks
simultaneously for
blinks