SimpliFiber Pro Meter and Test Kits
Users Manual
F
30
A
The wavelength being measured.
A
B
Indicates the meter is in auto wavelength mode.
B
C
The loss measurement. If the loss measurement is blinking,
the loss is negative and less than -1.0 dB. See "If Loss is
C
Negative" on page 31.
D
The reference value.
E
Pressing
D
reference.
F
Pressing
automatically switching wavelengths, the meter saves
E
measurements for all wavelengths in one record.
ffl17.eps
Figure 12. Loss Measurement Display
T
SET REF saves the measured power level as the
R
SAVE saves the measurement. If the source was