W
Warning: Class 1 Laser (singlemode and
FindFiber sources)
To avoid possible eye damage caused by hazardous
radiation:
•
Never look directly into optical connectors. Some
sources produce invisible radiation that can
permanently damage your eyes.
•
Never turn on the source unless a fiber is attached
to the port.
•
Do not use magnification to view the optical
outputs without proper filtering.
•
Use of controls, adjustments, or procedures not
stated herein might result in hazardous radiation
exposure.
*
W
To avoid damaging fiber connectors, to avoid data
loss, and to ensure maximum accuracy of test
results:
•
Use proper cleaning procedures to clean all fiber
connectors before every use. Neglecting this step
or using improper procedures can cause unreliable
test results and may permanently damage the
connectors.
•
Cover all connectors with protective caps when not
in use.
•
Never connect the source to an active network.
Doing so can disrupt network operations.
Safety Information
Caution
3