Charging - YUNEEC H520 Owner's Manual

Commercial series unmanned aerial aircraft.

Hide thumbs Also See for H520:

Table of Contents

HARGING

Power the desktop charger from a 100-240V AC outlet using the AC adapter/power supply, or from a 12V-

16.8V DC accessory socket/cigarette lighter receptacle in an automobile using the included adapter. Plug

the aircraft battery into the charger port as illustrated.

A green blinking LED indicates the charger is powered on and ready to charge, and a red blinking LED

indicates the battery is charging. It will take approximately 2.5 hours to charge a fully discharged (not over-

discharged) battery. A solid green LED indicates the battery is fully charged. Alternating red and green led

lights indicate balanced charging (this ensures the individual cells inside the battery are charged to similar

amounts).

Be certain to never completely drain an H520 battery. Batteries should be stored at 30-50% charge, and

never stored at full charge.

All instructions and warnings must be followed exactly to prevent property

damage and/or serious injury as the mishandling of Li-ion/LiPo batteries can

result in a fire.

WARNING

Yuneec Electric Aviation

H520 Start Guide

Table of Contents