Exiting the Software
1
Return to the top menu, and click the "EXIT" button.
When the following messages are displayed
If you encounter with the following messages, follow the instructions being explained in the following:
Message
Error in detecting the model.
Could not set up the LAN connection.
Please try again.
Solution (Details)
Go back to the previous screen and check the input signal. After that,
proceed to the error message screen.
* This software can only be used on compatible models.
Proceed to the setting screen from the top menu and check the LAN
connection by clicking the "CHECK" button.
If "NG" is displayed, perform the LAN setting again.
18
Click