Installing The Preparative Pump - Agilent Technologies 1260 Infinity User Manual

3
Installing the Pump

Installing the Preparative Pump

Installing the Preparative Pump

Parts required #
1
1
1
Preparations • Locate bench space.
• Provide power connections.
• Unpack the pump.
Instrument is partially energized when switched off
WA R N I N G
The power supply still uses some power, even if the power switch on the front panel
is turned off.
➔
Use of unsupplied cables
WA R N I N G
Using cables not supplied by Agilent Technologies can lead to damage of the
electronic components or personal injury.
➔
36
Part number Description
G1361A Pump
Power cord, for other cables see text below and Cable Overview in the Service
Manual
Control Software (ChemStation, EZChrom, OpenLab, etc.) and/or
G4208A or a handheld controller (Instant Pilot )
G1323B
To disconnect the module from line, unplug the power cord.
Never use cables other than the ones supplied by Agilent Technologies to ensure
proper functionality and compliance with safety or EMC regulations.
Agilent 1260 Infinity Preparative Pump User Manual