Installing The Idp-3 Pump - Agilent Technologies G6696A Installation Manual

2
Installation

Installing the IDP-3 Pump

WA R N I N G
18
To install the Agilent G6696A Oil Free IDP-3 Scroll Pump for
Turbo 597X:
The vacuum isolation valve is shipped installed on the pump
1
(Figure 6). If necessary, orient the vacuum isolation valve as
follows:
Loosen the hinged clamp.
a
Rotate the vacuum isolation valve so that it is oriented as
b
shown.
Tighten the hinged clamp securing the valve to the pump
c
hand tight.
Vacuum
isolation
valve
Hinged
clamp
Solenoid
connection
Figure 6 Vacuum isolation valve orientation
Ensure that the connector from the vacuum isolation valve
2
solenoid is securely inserted into the socket on the side of
the pump (Figure 6).
Do not use the exhaust filter cartridge if the application requires
capture or containment of gases being pumped. Instead, route the
pump exhaust to an appropriate collection system.
Install the exhaust filter cartridge on the threaded stem at
3
the front of the pump and tighten hand tight
Oil Free IDP-3 Scroll Pump for Turbo 597X Installation Guide
(Figure 7).