Installing The Idp-10 Pump - Agilent Technologies G6697A IDP-10 Installation Manual

2 Installation

Installing the IDP-10 Pump

Installing the IDP-10 Pump

To install the Agilent G6697A IDP-10 Scroll Vacuum Pump for Agilent 7000 and
7010 Series GC/MS:
1 Locate the Centering Ring.
2 Attach the free end of the new foreline hose assembly to the IDP-10 pump
3 Tighten the hinged clamp securing the valve to the pump hand tight.
Do not use the exhaust filter cartridge if the application requires capture or
WA R N I N G
containment of gases being pumped. Instead, route the pump exhaust to an
appropriate collection system.
18
using the Centering Ring included with the pump and the NW25 Clamp
(0100-0549) included with the kit as shown in
Figure 7. Foreline Hose Assembly installed
Agilent G6697A Oil Free IDP-10 Dry Scroll Pump Installation Guide
Figure 7.