Table of Contents
Advertisement
1MRS755958 C
5.6
630 series
Installation Manual
Terminal
Description
X336-16
Signal output 6, normally closed
X336-17
Signal output 6, normally open
X336-18
Signal output 6, common
Connecting power supply
When using power supply 110-250 VDC or 100-240 VAC, connect the IED's
auxiliary voltage to terminals X430-1 and X430–3 (4U half 19") and to terminals
X410-1 and X410–3 (6U half 19"). When using a DC supply, connect the positive
lead to terminal X430-3 (4U half 19") or X410–3 (6U half 19").
When using power supply 48-125 VDC, the IED's auxiliary voltage is connected to
terminals X430-1 and X430–2 (4U half 19") and X410-1 and X410–2 (6U half
19") with the positive lead connected to terminal X430-2 (4U half 19") or X410–2
(6U half 19").
The permitted auxiliary voltage range is found from the IED sticker.
Connect power supply to connector X430 (4U half 19") and X410
(6U half 19"). Do not connect the power supply to connectors X329
or X309.
Section 5
Connecting
ACT info
Hardware module
Hardware channel
instance
BIO_6
BO9_SO
57
Advertisement
Table of Contents
