Exiting The Dell Perc S140 Configuration Utility; Controller Management; Viewing The Controller Properties - Dell PowerEdge User Manual

Physical Disk Management
NOTE: Loading default settings in this page by clicking on Default button will not cause any changes in the controller
settings.
Figure 2. Dell PERC S140 Configuration Utility

Exiting the DELL PERC S140 Configuration Utility

To exit the utility and return to the System Setup screen, click Finish in the bottom-right corner on the screen.

Controller management

Viewing the controller properties

The View Controller Information screen allows you to view your controller and firmware properties.
In the System Setup Main Menu, click Device Settings > Dell PERC S140 Configuration Utility > Controller Management > View
Controller Information.
The table explains the View Controller Information screen details:
Table 10. View Controller Information
Menu Item
PCI ID
28 UEFI RAID configuration utility
allows you to configure, manage, view and perform varied operations on the physical disk
properties.
Description
Displays the PCI ID