Creating A Virtual Disk; Checking Perc S140 Options And The Boot List Priority - Dell PowerEdge User Manual

4 Click NVMe Settings.
5 Select RAID mode.
6 Click Back.
7 Click Finish.
Figure 8. NVMe Settings in BIOS
NOTE: If you change the NVMe Mode setting from RAID to Non RAID, ensure that the NVMe driver (Microsoft or third-
party NVMe driver) is installed manually in the Windows environment.

Creating a virtual disk

For more information about creating a virtual disk, see

Checking PERC S140 options and the boot list priority.

1 In the Virtual Disks field, ensure the bootable virtual disk is the first virtual disk listed. If the bootable virtual disk is not the first virtual
disk listed, see Swapping two virtual
NOTE: If Non-RAID virtual disks are used (and appear in the Virtual Disks list), the Swap Two Virtual Disks option is
enabled only if the system contains a RAID Capable physical disk.
2 Select Continue to Boot and press Enter.
Creating the virtual
disks.
disks.
Installing the drivers 41