Product Features; General Information - ELGO Electronic Z25 Operating Manual

3 Product Features

3.1

General information

NOTE!
During de-energized state, movements or displacements of the measuring system or encoder
are not evaluated! After powering up an incremental measuring system, a referencing proce-
dure must be performed. Information can be found in the operating manual of the respective
measuring system.
3.2 Product Features
The Z25 unit has numerous useful features and functions:
Position indicator with signal input for 1 axis

Input for conventional encoders and ELGO measuring systems (incremental or absolute)

Adjustable reference value, tool offset and saw blade width

7 digit LCD display with sign and measurement units

Encoder supply voltage +24 VDC

Easy to install

Relative / absolute measurement switchover by front key

Power down memory

1, 2 and 4 edge triggering

Further information about these functions can be found within this manual.
The compact Z25 position indicator has a 10 mm
high LCD display which allows a comfortable and
accurate reading actual positions. Commands like
Reset or Preset to an arbitrary reference value can be
done either via the dustproof front keypad or external
signals to 0 or to an arbitrary reference value.
The unit evaluates incremental square wave signals
from conventional rotary encoders as well as from the
ELGO magnetic linear encoder types LMIX, EMIX, MIX
or PMIX. Further the unit can be modulated for the
ELGO absolute linear encoder EMAX (by RS422).
- 7 -
Product Features