Table of Contents
Advertisement
4 Technical Data
4.1
Identification
The type label serves for the identification of the unit. It is located on the housing of the sensor and gives the
exact type designation (=order reference 11) with the corresponding part number. Furthermore, the type
label contains a unique, traceable device number. When corresponding with ELGO please always indicate this
data.
4.2
Dimensions Z25
Figure 1: Z25 dimensions
4.3
Technical Data
Display unit Z25-000
Power supply voltage
Consumption
Reverse polarity protection
Encoder supply voltage
Load by measuring system
LCD-Display
Perspective
Keypad
Measurement units
System accuracy
Operating temperature
Storage temperature
Humidity
Inputs
Input Frequency
Power down memory
Housing
Housing dimensions
Installation depth
Panel cut out
Protection class front
Protection class rear
24 VDC +/- 20 %
25 mA (without measuring system)
Yes
24 VDC
max. 300 mA
7 digits (height 10 mm) with sign and measurement units
12 o'clock
Foil with soft keys
mm, m, Inch, rpm or degrees
+/- 1 digit
0 ... +50° C
-20 ... +80° C
max. 80 %, non-condensing
max. input current 10 mA, PNP (active high), switching voltage 24 VDC
max. 80 kHz
FRAM
Norm panel housing, ABS plastic, black
W x H = 72 x 48 mm
27 mm (without connectors)
W x H = 68 x 45 mm
IP 54 (installed state with seal)
IP 43 (installed state without seal)
IP40
- 8 -
Technical Data
Hide quick links:
Advertisement
Table of Contents
