Teledyne EV71YC1MCL2010-BA0 User Manual page 22


Privilege level Management (PrivilegeLevel) : Get the current Camera privilege level.
 Read function (ASCII): "r lock" : Get the current privilege
Returned by the camera : 0 to 2
 Write function (ASCII): "w lock <val>" : <val> is as follow

2 : Lock the Camera in Integrator or "privilege User"

<computed value> : Unlock the Camera back in Integrator mode
There are 3 privilege levels for the camera :
> Factory (0) : Reserved for the Factory
> Integrator (1) : Reserved for system integrators
> User (2) : For all Users.
The Cameras are delivered in Integrator mode. They can be locked in User mode and a specific password is
required to switch back the Camera in Integrator mode. This password can be generated with a specific tool
available from the hotline (hotline-cam@Teledyne-e2v.com)

Camera status : Get the Camera status register (32bits Integer)
 Read function (ASCII): "r stat";
Returned by the camera : 32bits integer :

Bit 0 : (StatusWaitForTrigger) : True if no trig received from more than 1sec

Bit 1 : (StatusTriggerTooFast) : Missing triggers. Trig signal too fast

Bit 2, 3, 4, 5, 6, 7 : Reserved

Bit 8 : (StatusWarningOverflow) : True is an overflow occurs during FFC or Tap balance
processing.

Bit 9 : (StatusWarningUnderflow) : True is an underflow occurs during FFC or Tap balance
processing

Bits, 10, 11, 12, 13, 14, 15 : Reserved

Bit 16 : (StatusErrorHardware) : True if hardware error detected

Bits, 17 to 31 : Reserved
U M UNIIQA+ M
SER ANUAL ONOCHROME
– R J – 05/2017
EV
P | 22
A G E