6 Camera Software Interface
6.1
Control and Interface
As all the Teledyne-e2v Cameras, the UNIIQA+ CL is delivered with the friendly interface control software
COMMCAM.UCL (as "Ultimate Camera Link") which is based on the GenICam standard
COMMCAM recognizes and detects automatically all the UCL Cameras connected on any transport layers
(Camera Link or COM ports) of your system.
Once connected to the Camera you have an easy access to all its features. The visibility of these features can
be associated to three types of users: Beginner, Expert or Guru. Then you can make life easy for simple
users.
Minimum version of CommCam is 2.4.2 in order to recognize the UNIIQA+ Camera (all versions)
U
M
UNIIQA+ M
– R
J – 05/2017
P
| 17
SER
ANUAL
ONOCHROME
EV
A G E