Table of Contents
Advertisement
3.1
Main body
3.1.1 Removing the TOP PANEL assembly
(See Fig.1, 2)
(1) Remove the three screws A attaching the TOP PANEL as-
sembly. (See Fig.1)
(2) Lift up the TOP PANEL assembly, disconnect the card wire
from MAIN BOARD assembly connected to connector
CN431
of the TACT & TOUCH & LED BOARD assembly.
(See Fig.2)
SECTION 3
DISASSEMBLY
A
Fig.1
CN431
Fig.2
Advertisement
Chapters
Table of Contents
