Table of Contents
Advertisement
3.1.4 Removing the CD MECHANISM assembly
(See Fig.9, 10)
(1) Disconnect the connector wire from CD MECHANISM as-
sembly connected to connector
MAIN BOARD assembly. (See Fig.9)
(2) Remove the one screw D attaching the CD MECHANISM
assembly. (See Fig.9)
(3) Lift up the CD MECHANISM assembly, disconnect the card
wire from CD MECHANISM assembly connected to con-
nector
CN709
of the MAIN BOARD assembly. (See Fig.10)
1-10 (No.MB617)
CN104
and
CN708
of the
D
CN708
CN104
Fig.9
CN709
Fig.10
Advertisement
Chapters
Table of Contents
