JVC UX-EP100A Service Manual page 9

3.1.3 Removing the FRONT PANEL assembly
(See Fig.6 to 8)
(1) Remove the FITTING.
(2) Disconnect the card wire from FRONT PANEL assembly
connected to connector
sembly. (See Fig.6)
(3) Disengage the two hooks a and three hooks b engaged
both side of the FRONT PANEL assembly. (See Fig.7, 8)
CN701 of the MAIN BOARD as-
CN701
Fig.6
a
hook
Fig.7
b
hook
Fig.8
(No.MB617)1-9