UniPOS IFS7002 Instruction Manual
  1. Manuals
  2. Brands
  3. UniPOS Manuals
  4. Fire Alarms
  5. IFS7002
  6. Instruction manual

UniPOS IFS7002 Instruction Manual

Interactive fire control panel with two signal loops
Hide thumbs Also See for IFS7002:
Table of Contents

Advertisement

Quick Links

Interactive Fire Control Panel
IFS7002
two signal loops
Instruction Manual
Revision 11/01.17

Advertisement

Table of Contents
loading

Related Manuals for UniPOS IFS7002

Summary of Contents for UniPOS IFS7002

  • Page 1 Interactive Fire Control Panel IFS7002 two signal loops Instruction Manual Revision 11/01.17...

  • Page 2: Table Of Contents

    UniPOS IFS7002 two signal loops Contents 1. Introduction ........................... 6 2. Terminology ........................... 6 3. Function ............................8 4. Technical data ..........................8 4.1. Physical configuration ......................... 8 4.2. Fire alarm zones ..........................8 4.3. Fire alarm loops ........................... 8 4.4.
  • Page 3 UniPOS IFS7002 two signal loops 8.2. Indication ............................19 8.2.1. LED and sound indication ..........................19 8.2.2. Text messages .............................. 19 8.3. Using the keypad ..........................20 9. Fault Condition ........................... 23 9.1. Description ............................23 9.2. Indication ............................24 9.2.1.
  • Page 4 UniPOS IFS7002 two signal loops 13.3. Menu Panel parameters ........................61 13.4. Menu Loops ............................61 13.4.1. Menu Loop parameters ..........................62 13.4.2. Screen List Devices ............................ 62 13.4.3. Menu Device parameters ........................... 62 13.4.4. Function Check up............................68 13.4.5. Function Manual addressing ........................70 13.5.
  • Page 5 17.2.1. Clean initialization of loops with automated addressing ................112 17.2.2. Clean initialization of loops set to manual addressing ................112 17.3. Additional function buit-in IFS7002 .................... 114 18. Troubleshooting ........................115 19. Conditions of operation, storage and transportation ............. 117 19.1.

  • Page 6: Introduction

    UniPOS IFS7002 two signal loops 1. Introduction Interactive Fire Control Panel IFS 7002 is an up-to-date, high reliable, multifunctional and versatile device, providing the user with unexpected potential in the design, installation and operation of addressable fire alarm systems. Some of its main features and possibilities are: ...
  • Page 7 Interactive Fire Control Panel IFS7002 allows for formation of a maximum of 250 zones. Up to 60 fire detectors can be integrated in each zone.

  • Page 8: Function

    IFS7002 has 1 power loop, its load carrying capacity is 1000 mA. SYSTEM ERROR – fatal fault condition due to a fault in system’s basic component SYSTEM OPERATION –...

  • Page 9: Power Loop

    UniPOS IFS7002 two signal loops  Maximum number of fire detectors in a loop - 125  Connecting line - two-wire shielded  Maximum resistance of a loop - 100  Output resistance of a loop - 20  Maximum consumption of a loop - 120mA 4.4.

  • Page 10: Consumption On Back Up Batteries Supply

    Fig.1 Fig.2 6.1. Access levels 4 levels of access to the variable indications and control functions of IFS7002 are available. 6.1.1. Access Level 1 All persons who would presumably find out and react to alarm upon fault condition or fire condition have access to level 1.

  • Page 11: Access Level 2

    6.2. Indications and buttons for control Table 1 gives detail description of the indications for each status, Table 2 presents the basic means for control. Appendix 1 shows the front panel of IFS7002. Table 1 Conditions of the fire control panel Indication Indicator Power supply –...

  • Page 12: Zone In Coincidence Mode

    UniPOS IFS7002 two signal loops Conditions of the fire control panel Indication Fault condition - Common indicator Fault condition – continuous yellow light All faults except for Battery Low Indicator System error - continuous Fault condition – System error yellow light...
  • Page 13 UniPOS IFS7002 two signal loops Condition of the fire Access Means of control Operation control panel level Button Fire Fire condition, phase Levels To force transition to phase Fire condition condition stage II Fire condition stage I 1 and 2...

  • Page 14: Addressing, Initialization, Re-Initialization

    UniPOS IFS7002 two signal loops Condition of the fire Access Means of control Operation control panel level executed; Level 3А SetUp Mode - To exit the current menu and to move to an upper hierarchy menu Button Change Information and...

  • Page 15: Initialization

    UniPOS IFS7002 two signal loops In automated addressing the fire alarm loops’ units obtain addresses according to a strictly specified algorithm and the fire control panel is capable to detect their location later. To be able to operate in automated addressing mode, a fire detector shall meet the following requirements: ...

  • Page 16: Re-Initialization

    UniPOS IFS7002 two signal loops  The fire control panel or an output is being switched on at Set Up, when the addressable units’ configuration is registered in the control panel (i.e clear initialization has already been done);  Start up of the Initialization function, in Set Up Mode (see section 13.8.1).

  • Page 17: Operation Of The Fire Control Panel

     the fire control panel enters Duty Mode after all other conditions are exited;  when the fire control panel enters SetUp Mode it exits all other conditions. Up to 250 fire alarm zones can be formed in IFS7002. Except for these zones the fire control panel supports two additional zones: ...

  • Page 18: Duty Mode

    UniPOS IFS7002 two signal loops  The unit shall be excluded from the Service zone, via Menu “Re-addressation” (see section 13.9.3) and the suitable address shall be assigned;  The new loop configuration shall be saved through Function “Clear Initialization” (see section 13.9.2).

  • Page 19: Indication

    UniPOS IFS7002 two signal loops (see section 8.3.1). When Fire condition stage I in this particular zone expires, the fire control panel enters Fire condition stage II in the same zone. The fire control panel enters Fire condition stage I upon activation of an automatic fire detector and Fire condition stage II - upon activation of a manual call point.

  • Page 20: Using The Keypad

    UniPOS IFS7002 two signal loops The second panel (the middle one) provides information on devices in fire condition. In the head part is displayed the total number of devices in fire condition. The panel itself is subdivided into three text fields, each providing two lines. The upper two-line field displays information on the first device that has detected fire condition;...
  • Page 21 UniPOS IFS7002 two signal loops 8.3.4.1. Access Level 1 Press the button at Access level FIRE CONDITION ZONES IN FIRE: 1 to display a screen where the 1 Phase 1 Zone 001 Local Time Fire Phase2: 068 Zone 001 password is entered:...
  • Page 22 UniPOS IFS7002 two signal loops 8.3.5.1. Access Level 1 Press the button at Access Level 1 to display a screen for password entering Enter the password using the FIRE CONDITION ZONES IN FIRE: buttons with figures, replacing the 1 Phase 1...

  • Page 23: Fault Condition

    UniPOS IFS7002 two signal loops 8.3.6.2. Panel for devices in Fire condition Where suppressed messages for devices in Fire condition are available, they are displayed in the two text fields of the second (middle) panel, by the meansр of buttons situated in the right part of the panel.

  • Page 24: Indication

    UniPOS IFS7002 two signal loops Where a fatal system error occurs, the main processor can not continue operation and the fire control panel does not control loops, outputs and other periphery devices. To exit fatal system error you have to cut off the mains supply and to repair the control panel.

  • Page 25: Using The Keypad

    UniPOS IFS7002 two signal loops Upon Battery Low condition - full discharge of the backup batteries due to interrupted power supply – the following information screen appears: The screen suppresses all other text indications, with the exception of System error message, and can not Battery low be suppressed.

  • Page 26: Disabled Component

    UniPOS IFS7002 two signal loops 10. Disabled component 10.1. Description The fire control panel enters Disabled component after a manual operation, disabling a specific component – a fire alarm zone, addressable device or monitored output. The condition is handled via Information and Control screens.

  • Page 27: Indicators

    UniPOS IFS7002 two signal loops  Occurred events (with the exception of triggered isolator in the zone) are not saved in the energy independent memory;  The zone is being automatically reset every 60 s (detectors in fire condition receive a command to reset the fire) 11.2.

  • Page 28: Menu Lists

     Menu Outputs – displays information only for outputs in fault condition (monitored outputs and addressable output devices);  Menu „LAN objects” – to display information for remote control panels (Appendix Interactive Fire Control Panel IFS7002 – Local Network Operation). The four subordinate menus FIRE CONTROL PANEL IFS7002 have identical layout.
  • Page 29 UniPOS IFS7002 two signal loops If faults are detected, the following FIRE CONTROL PANEL IFS7002 screen appears: UniPOS Each message can be displayed in a few lines – from 1 to 4. It brings Faults Total: 00003/00001* Failed Outputs: 00000...
  • Page 30 UniPOS IFS7002 two signal loops Screen Total has the following FIRE CONTROL PANEL IFS7002 layout: UniPOS It brings information out for: Faults Total: 00000/00000* Failed Outputs: 00000  Total number of disables; Disables Total: Disabled Outputs: List/Disables/Total  Number of disabled zones;...

  • Page 31: Menu Zones In Test

    UniPOS IFS7002 two signal loops  Text message for the device – for addressable output devices only. Buttons situated in the right panel section scroll the pages up and down and allow displaying next page or previous page. Each page contains 5 messages for disables. Button appears on the screen if next page is available;...
  • Page 32 UniPOS IFS7002 two signal loops 12.2.3.2. Zone Status If no disables of specific type are FIRE CONTROL PANEL IFS7002 available following screen UniPOS appears: List/Test/Zone Status NO ZONES IN TEST С Mode:DAY ActInp 0000 10:12:28 Mon 08 Mar 2010 If disables are available the status of...
  • Page 33 UniPOS IFS7002 two signal loops 12.2.4. Menu Input messages The menu displays messages sent by activated addressable input devices. Where no activated addressable FIRE CONTROL PANEL IFS7002 input devices are available, the UniPOS following screen appears: Inputs Messages 0000 NO MESSAGES...
  • Page 34 UniPOS IFS7002 two signal loops 12.2.5.1. Fire Condition Screen The screen displays information about:  the total number of zones in FIRE CONDITION ZONES IN FIRE:  Fire conition; 1 Phase 2 Zone 001 LOCAL Zone 001  the sequence number of the...

  • Page 35: Menu Loops

    UniPOS IFS7002 two signal loops 12.2.6. Screen Panel configuration The screen displays information FIRE CONTROL PANEL IFS7002 associated with:  The fire control panel local UniPOS network; possible conditions are none, On or Off; Panel configuration v16.10.08  Periphery devices;...
  • Page 36 UniPOS IFS7002 two signal loops  Screen List devices  Menu Device parameters. 12.2.8.1. Screen Loop parameters The screen provides information FIRE CONTROL PANEL IFS7002 for fire alarm loop parameters:  Loop status – On or Off; UniPOS  Number of devices integrated in the loop.
  • Page 37 UniPOS IFS7002 two signal loops 12.2.8.3. Menu Device parameters The menu provides information for the parameters of devices integrated in the fire alarm loop. Enter the menu to display:  A screen with the message No integrated devices – if no devices are available in the loop; the only option is to exit the menu;...

  • Page 38: Menu Zones

    UniPOS IFS7002 two signal loops Set Up Device 2 Loop 1 If the device is FD7201 or FD7201S Device type: FD7201 type and we want it to operate as a monitored input, enter Settings /Loop Status: On / Loop X / Device Parameters and...
  • Page 39 UniPOS IFS7002 two signal loops When you press button FIRE CONTROL PANEL IFS7002 when the Go to field is empty, a UniPOS menu with a group of parameters of the selected zone will appear on the display:  Screen Devices;...
  • Page 40 UniPOS IFS7002 two signal loops screen Panel Outputs FIRE CONTROL PANEL IFS7002 provides information outputs UniPOS responding to the relevant phase of Fire condition in the zone: Parameters: Zone 1 Fire Phase 1 Outputs Panel Outputs Monitored Output 1 Monitored Output 2...

  • Page 41: Menu Device Status

    UniPOS IFS7002 two signal loops 12.2.9.3. Screen Zone Parameters The screen displays common zone FIRE CONTROL PANEL IFS7002 parameters: UniPOS  Manual call point priority – where the manual call points have priority, their response will force the zone to enter Fire Parameters: Zone 1 Condition Phase 2;...
  • Page 42 UniPOS IFS7002 two signal loops  If you enter a number higher than the actual number of devices, the last device will be selected. At the same time button and the number in the Go to field disappear, i.e. are deactivated.
  • Page 43 UniPOS IFS7002 two signal loops  LED status – Off (not illuminated/ not flashing) or On (illuminated);  Information for the level of detector contamination– the text message Contaminated appears only if the fire detector is contaminated and needs cleaning;...

  • Page 44: Menu Inputs

    UniPOS IFS7002 two signal loops  LED status – Off (not illuminated/ not flashing) or On (illuminated);  Information for fault condition – the text message Fault appears only if the module detected a fault condition  For Input/Output modules type FD7203OC and FD7203R: ...
  • Page 45 UniPOS IFS7002 two signal loops  Where addressable input devices are available – a FIRE CONTROL PANEL IFS7002 UniPOS screen for selection of the first addressable input whose parameters displayed: Parameters: Input Go to: For each addressable input are displayed: ...

  • Page 46: Menu Archive

    UniPOS IFS7002 two signal loops When you press button FIRE CONTROL PANEL IFS7002 and the arrow „>>” is visible (Go to UniPOS field is empty) a screen displaying parameters of selected addressable input appears: Parameters: Input Lp1 Аddr9.1 screen provides Text message №1...
  • Page 47 UniPOS IFS7002 two signal loops The code and the specific information for events from the type Disables are Event character Event code Specific information Zone disabled Disable Zone Zone number; Text message of the zone Zone enabled Disable Zone reset Device disabled (fire alarm Zone number;...
  • Page 48 UniPOS IFS7002 two signal loops Event character Event code Specific information Fault condition Different Different device ID Device ID Fault condition Different Different device Device Type type Zone number; Fault condition Different Different device Loop where the device is integrated;...
  • Page 49 UniPOS IFS7002 two signal loops Event character Event code Specific information Fault condition Fault in mains Fault Mains Power supply exited reset Fault condition Fault in back Fault Battery up battery supply Fault condition Fault in back Fault Battery reset...
  • Page 50 UniPOS IFS7002 two signal loops The code and the specific information for events from the type General are: Event character Event code Specific information Reset of the fire control panel Reset Panel – Manual Set Up Manual Set Up Remote Set Up...
  • Page 51 UniPOS IFS7002 two signal loops 12.2.12.2. Menu Fire conditions The menu displays only the records for events – filter Fire conditions is selected. Enter the menu to display:  Where no records of fire conditions are available – a screen with the text message No records in archive, the only option is to exit the menu;...
  • Page 52 UniPOS IFS7002 two signal loops 12.2.12.4. Menu Period The menu displays only records of events that occurred during a specified period. It contains the following subordinate menus:  Menu After date – displays only records of events that occurred after the specified date (filter After date);...

  • Page 53: Menu Select Loc/Rem. Control Panel

    12.2.13. Menu Select Loc/Rem. Control Panel – to select a particular control panel that will undergo set up or which parameters, events or status will be reviewed (Appendix Interactive Fire Control Panel IFS7002 – Local Network Operation). 12.3. Menu System functions The menu contains the following subordinate menus and functions: ...

  • Page 54: Menu Disables

    UniPOS IFS7002 two signal loops If wrong password is entered, when you press button the digits will be deleted and the cursor will move back to the first position. If one of the 10 passwords for Access Level 2 or Access Level 3 is entered, when you press button the menu will become active.
  • Page 55 UniPOS IFS7002 two signal loops  If the selected number is higher than 250, the status of Fire alarm zone 250 will be displayed;  If the zone has not been shaped yet, instead of text message for the zone appears Free zone.
  • Page 56 UniPOS IFS7002 two signal loops Simultaneously, the number in the Go to field will be deleted; i.e. the field is deactivated. When you press button the detector status is being changed alternatively from DISABLED to ENABLED and reverse; in the panel bottom left section appears a reminder Data not saved.

  • Page 57: Menu Zones In Test

    UniPOS IFS7002 two signal loops  If disabled addressable FIRE CONTROL PANEL IFS7002 output modules are available – UniPOS first disabled addressable output module will be displayed, and the text Faults total: 00000 Failed Outputs: 00000 Disables total: Disabled outputs:...

  • Page 58: Function Set Clock

    UniPOS IFS7002 two signal loops  If some zones in test are FIRE CONTROL PANEL IFS7002 available, the first zone in test UniPOS will be displayed, and in the panel bottom section will appear the text message of the zone:...

  • Page 59: Function Set Mode

    UniPOS IFS7002 two signal loops – they will display the To set the current day of the week (line two) use buttons previous or the next day of the week. Moving from Monday to previous day will set the day to Sunday;...

  • Page 60: Menu Set Up

    UniPOS IFS7002 two signal loops Press the button once again to discontinue the check-up operation; the LEDs and the local sounder restore their initial state. is extended – except for the basic functions they also The operation of buttons discontinue the check-up if it has been started.

  • Page 61: Menu Panel Configuration

    UniPOS IFS7002 two signal loops The displayed screens have a tree structure of subordinate menus (Appendix 2b). Transition to a lower hierarchy menu is performed via button (Enter); to revert to a previous/ upper hierarchy menu use button (Cancel). To move between elements of a single menu use buttons (Down) –...

  • Page 62: Menu Panel Parameters

    13.3. Menu Panel parameters Use the menu when the control panel is integrated into a local network of panels (see Interactive Fire Control Panel IFS7002 – Operation in Local Network). 13.4. Menu Loops The menu is provided for set up of fire alarm loops and devices integrated in the loops. It contains two submenus of identical layout –...
  • Page 63 UniPOS IFS7002 two signal loops 13.4.2. Screen List Devices The screen displays a list of the List devices devices, by type and their respective Loop 1 Loop 2 number, if the loop is initialized: Example: Fixed-temperature fire FD7110 = 003...
  • Page 64 UniPOS IFS7002 two signal loops Press button when the Go to field is empty and a menu containing a group of parameters for the selected device will be displayed:  Menu Device parameters;  Screen Text message. 13.4.3.1. Menu Device parameters...
  • Page 65 UniPOS IFS7002 two signal loops The following screen is displayed Setup Device 2 Loop 1 if FD7201 is used as a conventional Device type: FD7201 line-monitoring module. Status: On Class: A2S Type: Adapter Mode DAY 16:13:30 Tue 23 Mar 2010...
  • Page 66 UniPOS IFS7002 two signal loops fire control panel or a signal for switching the output off. Upon receiving a signal for activation the device starts the waiting time setup Continuous output signal in advance in the screen with programmed time delay...
  • Page 67 UniPOS IFS7002 two signal loops fire control panel or a signal for switching the output off. The signal from the activated output is a pulse sequence with width programmed by the user. The output sends the described signal after the...
  • Page 68 UniPOS IFS7002 two signal loops button after a 40-symbol message is already entered, the text will not be accepted and the symbol will not be inserted (the cursor moves one position to the right if the end of the text message is not reached yet).

  • Page 69: Function Check Up

    UniPOS IFS7002 two signal loops To exit the screen and revert to upper hierarchy menu use button on the built-in keypad or („Back Space”) on the external keypad. button on the built-in keypad or button „Esc” on the external keypad.

  • Page 70: Function Manual Addressing

    UniPOS IFS7002 two signal loops After check up is completed a Check up Loop 1 screen with results is displayed: The Loop is O'k Devices: Branches: In the centre of the screen results from the closed loop check up are displayed which can be: ...
  • Page 71 UniPOS IFS7002 two signal loops 13.4.5.1. Operation of Manual addressing The function operates following the sequence below: 1. Check for availability of any Manual Addressing Loop 1 devices in Service zone 0. If the zone is not empty, the following screen appears:...
  • Page 72 UniPOS IFS7002 two signal loops  In case of loop overload: Manual Addressing Loop 1 Only exit of the function is Loop overloaded allowed. In this case the cause of overload shall be eliminated. Mode: DAY 15:44:53 Tue 23 Mar 2010 ...
  • Page 73 UniPOS IFS7002 two signal loops 4.1. In case Manual Addressing Loop 1 unsuccessful communication with the device: Only exit Error in data Transfer to the Device, function is allowed. С Mode: DAY 15:47:28 Tue 23 Mar 2010 4.2. In case...
  • Page 74 UniPOS IFS7002 two signal loops  In case of detected Manual Addressing Loop 1 devices with this particular address: New address: Status: device address Doubled Address shall be corrected in the screen using buttons with figures. С Mode: DAY 15:49:33 Tue 23 Mar 2010 ...
  • Page 75 UniPOS IFS7002 two signal loops 5.2. Where uninitialized Manual Addressing Loop 1 devices detected appears following screen: Put new Device or Escape The function is waiting for new device to be installed in the loop or to press button to exit the С...
  • Page 76 UniPOS IFS7002 two signal loops a) In case of unsuccessful Manual Addressing Loop 1 device communication: Exit of the function is Error in data Transfer to the Device allowed only. С Mode: DAY 15:56:42 Mon 22 Mar 2010 b) In...
  • Page 77 UniPOS IFS7002 two signal loops  In case a device with Manual Addressing Loop 1 the same address is detected in the loop: device address shall be corrected in the New Address: screen using Status: buttons with figures. Doubled address С...

  • Page 78: Menu Zones

    UniPOS IFS7002 two signal loops 13.5. Menu Zones The menu allows the user to SetUp Zones Zones: 017 Go to: form fire alarm zones and to set up >> Free zone: 18 their parameters. Enter the menu to Zone 18...
  • Page 79 UniPOS IFS7002 two signal loops 13.5.1. Menu Devices The menu allows the user to integrate (to include) a device in a zone and to exclude a device from a zone. It contains the following submenus and screens:  Screen List of devices;...
  • Page 80 UniPOS IFS7002 two signal loops 13.5.1.3. Menu Remove address The menu allows the user to SetUp Zone 1 Remove address Go to: remove particular devices from the Total: 17 >> 1 Lp1 Аddr1 zone: Point 1.001 2 Lp1 Аddr2 For each device is displayed: Point 1.002...
  • Page 81 UniPOS IFS7002 two signal loops 13.5.1.4. Menu Remove address range The menu allows the user to SetUp Zone 1 Remove address range remove a group of devices from the zone, having consequent addresses Total: 17 in a single loop: Loop:...
  • Page 82 UniPOS IFS7002 two signal loops 13.5.1.5. Menu Add address The menu allows the user to add separate devices to the zone. Enter the menu to display:  If no free device is available – a screen with the text message All addresses are included in zones, the only option is to exit the menu;...
  • Page 83 UniPOS IFS7002 two signal loops 13.5.1.6. Menu Add address range The menu allows the user to add SetUp Zone 1 Add address range group devices, having consequent addresses in a single Total: 17 loop, to the zone: Loop: For each group of devices the...

  • Page 84: Menus Fire Phase 1 Outputs And Fire Phase 2 Outputs

    UniPOS IFS7002 two signal loops 13.5.2. Menus Fire Phase 1 Outputs and Fire Phase 2 Outputs The menus alow the user to associate outputs to the zone, that wil be triggered in fire condition (phase Fire condition stage I and phase Fire condition stage II). The menus contain: ...
  • Page 85 UniPOS IFS7002 two signal loops 13.5.2.3. Menu Remove addressable outputs The menu allows the user to SetUp Zone 1 Fire Phase 1 Outputs Go to: remove separate addressable Remove addressable Output Total: 17 >> 1 Lp1 Аddr7.2 outputs associated to the zone: Point 1.007...
  • Page 86 UniPOS IFS7002 two signal loops 13.5.2.4. Menu Add addressable output The menu allows the user to associate separate addressable outputs to the zone. Enter the menu to display:  If no free addressable outputs, not associated to a zone in accordance with the relevant fire phase are available –...

  • Page 87: Menu Zone Parameters

    UniPOS IFS7002 two signal loops 13.5.3. Menu Zone parameters The menu is provided for zone SetUp Zone 1 Zone parameters parameters set up:  Manual call point priority – Manual call point Priority: when the manual call points Coincidence Mode: have priority, their response Time Fire Phase 1 –...

  • Page 88: Menu Service Rem. Zones

    13.5.4. Menu Service Rem. Zones The menu allows the user to specify the serviced remote control panels in the zone (see Interactive Fire Control Panel IFS7002 – Local Network Operation). 13.5.5. Screen Text message The screen allows the user to insert and edit a text message for a zone. Upon activation of the screen a check up is being run for included external keyboard.
  • Page 89 UniPOS IFS7002 two signal loops 13.5.5.2. External keyboard Where an external keyboard is SetUp Zone 1 Text message connected to the control panel, it can be used in SetUp Menu, to enter or correct parameters. When text messages are to be corrected, the...

  • Page 90: Menu Inputs

    UniPOS IFS7002 two signal loops 13.6. Menu Inputs Use this menu to setup the addressable inputs of input-output devices FD7203 and to define FD7201 and FD7201S as monitored inputs. FD7203 inputs are reset automatically when the input action ceases. It is possible FD7201 and FD7201S monitored inputs to be setup to be reset automatically when the input action ceases or manually when manually operating the fire control panel.
  • Page 91 UniPOS IFS7002 two signal loops 13.6.1. Screen List of addressable outputs The screen displays a list of SetUp Input Lp1 Аddr19.1 addressable outputs that will be List of addressable Outputs Total: 11 initiated upon activation addressable input. For each output is...

  • Page 92: Menu Add Addressable Output

    UniPOS IFS7002 two signal loops When you press button and the Go to field is empty, the list of outputs activated by the addressable input will be deleted. When the last output from the list is deleted, a screen with the message No addressable outputs activated by this input appears;...

  • Page 93: Screen Outputs Activation Mode

    UniPOS IFS7002 two signal loops 13.6.4. Screen Outputs activation mode Use this screen to setup the fire control Set Up Input Lp1 Addr19.1 panel mode for activating the outputs assigned to the input when the input is activated: In Duty Mode;...
  • Page 94 UniPOS IFS7002 two signal loops  If the pointer is at parameter Edit and the value of Text message № is higher than 0 – screen Edit will be activated. Screen Edit allows the user to set and edit a text message for the addressble input. Upon activation of the screen a check for included external keyboard is being run.

  • Page 95: Menu Initialization

    UniPOS IFS7002 two signal loops 13.6.5.2. External keyboard external keyboard SetUp Input Lp1 Аddr19.1 included to the fire control panel, the Text message following screen appears: To edit the text use the buttons having symbols – when you press a...
  • Page 96 UniPOS IFS7002 two signal loops 13.7.1. Function Initialization The function performs standard initialization of the addressable devices in the fire alarm loops. Upon activation of the function Initialization following warning screen Warning! appears: New Initialization! Loop 1: On Loop2: On...
  • Page 97 UniPOS IFS7002 two signal loops In case of successful initilization List of devices by type the following screen is displayed: Loop 1 Loop 2 FD7110 = 003 FD7110 = 002 FD7120 = 001 FD7120 = 003 FD7130 = 030 FD7130...
  • Page 98 UniPOS IFS7002 two signal loops Upon unsuccessful initialization Initialization appears the following screen: Operation unsuccessful! Would You like to run the Operation again? – confirm – cancel Mode:DAY LOC 15:24:47 Fri 26 Mar 2010 In case of successful initilization List of devices...

  • Page 99: Menu Readdressing

    UniPOS IFS7002 two signal loops 13.7.3. Menu Readdressing The menu allows the user to exclude an addressable device from the service zone. Enter the menu to display:  If no devices are available in the service zone – a screen with the message The service Zone is empty;...

  • Page 100: Menu Exclude Devices

    UniPOS IFS7002 two signal loops If the new address is out of the Readdressing Lp1 Аddr2 New address:3 specified range, button Point 1.003 ignored. Otherwise command screen appears where you shall Different Device ID Different Device Type confirm the readdressing:...

  • Page 101: Menu Check

    UniPOS IFS7002 two signal loops When you press button and a number is already entered in the Go to field, the device whose number is in the field will be selected:  If the number is 0, Address 1 in Loop 1 will be selected ;...
  • Page 102 UniPOS IFS7002 two signal loops  Information for the communication with the devices:  the loop is off – appears the message The loop is off (no attempt for communication with the device has been made);  the loop is On, but is not initialized – appears the message Uninitialized loop (no attempt for communication with the device has been made);...

  • Page 103: Menu Checks

    UniPOS IFS7002 two signal loops 13.8. Menu Checks The menu allows the user to set up the control panel outputs (monitored, relay and addressable), the display and the buttons. It cointains the following submenus and functions:  Menu Monitored outputs;...
  • Page 104 UniPOS IFS7002 two signal loops 13.8.3. Menu Addressable outputs Use the menu to check the addressable outputs of the control panel. When you enter the menu the following operations are being run:  If no addressable outputs are available – a screen with the message No addressable outputs appears;...

  • Page 105: Function Display

    UniPOS IFS7002 two signal loops When you press button and a number is already entered in the Go to field, the field is deactivated. When you press button and the Go to field is empty, the button effect is ignored.
  • Page 106 UniPOS IFS7002 two signal loops When random button Check Buttons pressed (except for buttons Prush a button ) a message and a graphic image of the presses button appear: - Exit - Set Up Prushed button С Mode DAY 17:21:09...

  • Page 107: Menu New Passwords

    UniPOS IFS7002 two signal loops 13.9. Menu New passwords The menu allows the user to compose and edit passwords for Access Level 2 and Access Level 3. It contains:  Menu Level 2;  Function Level 3. 13.9.1. Menu Level 2 The menu allows the user to enter and edit passwords for Access Level 2.

  • Page 108: Function Default Parameters

    UniPOS IFS7002 two signal loops 13.10. Function Default parameters The function saves the default parameters of the control panel. Upon activation the following Default Parameters screen appears: Warning! Default Parameters will be saved! – confirm – cancel Mode:DAY LOC 9:41:49...

  • Page 109: Function Clear Archive

    UniPOS IFS7002 two signal loops  The loop is off;  Number of devices in the loop – 0;  Maximum current in the loop – 200mA;  Addressing – automated;  Power loop – off;  Zone 1-250 parameters: ...

  • Page 110: Saving The Parameters

    UniPOS IFS7002 two signal loops Upon unsuccessful operation Clear Archive appears the following screen: Operation unsuccessful! Would You like to run the Operation again? – confirm – cancel Mode:DAY LOC 10:38:08 29 Mar 2005 Upon successful operation the menu will be exited automatically.

  • Page 111: Periphery Devices Assembly

    UniPOS IFS7002 two signal loops 16.2. Periphery devices assembly All connections are to be made by means of terminals, mounted on the printed circuit board 7002 Main (Appendix 4). Be advised, that the total consumption of the voltage powering the external devices (terminal “+ 28V”) plus the consumption of the monitored outputs shall not exceed 5A in...

  • Page 112: Power Supply Connection

    UniPOS IFS7002 two signal loops In one fire alarm loop a maximum of 125 addressable devices can be included regardless of their type. Unused fire alarm loops remain free (no connection is made to their terminals). It is recommended to include addressable devices in closed fire alarm loops (Appendix 5b). If branches of the loop (Apendix 5c) are to be used, the following restrictions shall be observed: ...

  • Page 113: Clean Initialization Of Loops

    UniPOS IFS7002 two signal loops  If the panel is a part of network and addressable outputs will be activated, in “Fire” mode in remote panel should be made setup of the service remote panel and her zone- Menu “Service Rem. Zones t”;...
  • Page 114 UniPOS IFS7002 two signal loops Clean initialization of a loop set to manual addressing may be done in two ways – when the fire control panel is not installed yet and when it is already installed on site. 17.2.2.1. Clean initialization before the control panel is installed on site The unpacked fire control panel shall be connected to a temporary power supply, according to the description in section 17.5.

  • Page 115: Additional Function Buit-In Ifs7002

    The activation of this function (a password for suppressing/disabling the activated outputs in Fire condition not to be required.in IFS7002) is not in conformity with the European Standard EN54-2 and it must not be used in the countries where that standard is valid.

  • Page 116: Troubleshooting

    UniPOS IFS7002 two signal loops 18. Troubleshooting Possible problems and methods of troubleshooting are described in Table 7. Table 7 Trouble Indication Troubleshooting Fatal system error The trouble shall be fixed in Indicators illuminate in Technical Service and steady yellow light; the local sounder...
  • Page 117 UniPOS IFS7002 two signal loops Trouble Indication Troubleshooting Fault Contaminated Remove the detector and clean Indicator illuminates in continuous sensor (only in the optical part and place it yellow light; the local sounder releases detectors with optical- again. discontinuous signal; information table...

  • Page 118: Conditions Of Operation, Storage And Transportation

     the conditions of storage and transportation have been observed;  the startup has been done by authorized personnel only  the requirements for operation stated herein have been observed. UniPOS wishes you a successful work! Instruction Manual Page 118 Revision 11/01.17...

  • Page 119: Appendixes

    UniPOS IFS7002 two signal loops 21. Appendixes Appendix 1 Common indicator for fire condition Common indicator for fault condition Indicator for System error Indicator for Fault in power supply Indicator for Disabled component Test indicator Indicator for Power supply LCD display...
  • Page 120 UniPOS IFS7002 two signal loops Appendix 2 Duty Mode Fire condition Automatically Main screen Lists System functions SetUp Total Zones Password Level 3 Password Level 2 Faults Devices Appendix 2b Outputs LAN objects Disables Zones Total Devices Disables Zones Zones in...
  • Page 121 UniPOS IFS7002 two signal loops Appendix 2 continued SetUp Password Level 3 CAN local object name Network Control panel CAN local parameters configuration Local network CAN objects Loop parameters Control panel Devices parameters parameters List of devices Check Loop 1...
  • Page 122 UniPOS IFS7002 two signal loops Appendix 2 continued From part 1 List Addressable outputs Delete addressable output Inputs Add addressable output Outputs activation mode Text Message Initialization Clean Initialization Initialization Readdressation Exclude devices Check Monitored outputs Relay outputs Check-ups Addressable outputs...
  • Page 123 UniPOS IFS7002 two signal loops Appendix 3 General assembly diagram Instruction Manual Page 123 Revision 11/01.17 Of 145...
  • Page 124 UniPOS IFS7002 two signal loops Appendix 4 – standard 9-lead coupling for RS232 RS232 serial interface – terminals for CAN 2.0B serial interface CAN 1 – terminals for CAN 2.0B serial interface CAN 2 – jumper to end CAN1 JP 1 –...
  • Page 125 UniPOS IFS7002 two signal loops Appendix 5 -LoopX-1 First device FD7203 RI/KL- -IN/OUT FD7204 +OUT FD71XX +LoopX-1 +PowerL-1 -PowerL-1 -PowerL-2 +PowerL-2 +LoopX-2 FD71XX FD7201 Last device (max 125) +OUT +OUT -IN/OUT RI/KL- -IN/OUT RI/KL- -LoopX-2 Last First FD80XX FD30XX device...
  • Page 126 UniPOS IFS7002 two signal loops Appendix 5 continued PowerL-2 PowerL-1 Address4 Address1 Address2 Address3 FD7203/7204 Loop1-1 Address5 FD71XX FD71XX FD71XX Address125max Address7 Address6 FD71XX Loop1-2 FD71XX FD71XX FD7203/7204 Address4 Address1 Address2 Address3 FD7203/7204 Loop2-1 Address5 FD71XX FD71XX FD71XX Address125max Address7...
  • Page 127 UniPOS IFS7002 two signal loops Appendix 5 continued Address K+1 Address 125max Address K+2 Address 1 Address 3 LoopX-1 Address 2 Address 4 Address 5 Address K Address 7 LoopX-2 Address 6 d) Improper connection of Fire alarm loop branch...
  • Page 128 Input/output IFS7002 module devive -Out а) Diagram for connecting Input/output module to monitored output Fire control panel IFS7002 or Input/output module FD7203 Rel X +24V Input/output module b) Diagram for connecting Input/output module to relay output Connection diagrams for Input/output module...
  • Page 129 7203 72 4S RS232 FIRE FIRE MODEM FIRE MODEM CAN2 CAN2 MODEM CAN1 CAN1 CAN1 RS 232 CAN2 RS 232 Block diagram of fire alarm installation designed on the base of IFS7002 Instruction Manual Page 129 Revision 11/01.17 Of 145...
  • Page 130 UniPOS IFS7002 two signal loops Appendix 8 IFS 7002 EOL-1 710 A Kонтролиран обект FD7201 connected to monitored input EOL-2 FD 720 1S Monitored object FD7201S connected to monitored input The resistor value is determined according to the line voltage in which it is included, using the law of Ohms: If the voltage is within the range of (12 –...
  • Page 131 3,6k токозахранване (5?30)V Изпълнително устройство Power Loop Address Loop IFS7002 Input-output device FD7203 (10 inputs/16 outpust) Cable Connection to panel IFS7002 9 10 11 12 13 14 Външно захранване Адресен контур - Out + + +LED Диод 1N4001 Контакт NO или...
  • Page 132 In High speed mode of operation the line shall be terminated at both ends with 120 Ω characteristic impedance. In IFS7002 the fire alarm line termination is done by the appropriate jumpers situated on the main board. IFS7002 can support two CAN interfaces. Need for more interfaces appeared due to the requirements for development of complex topologies and networks of fire control panels.
  • Page 133 UniPOS IFS7002 two signal loops accordance with site specifications. At the same time it provides option for logical association of devices having various CAN interfaces. It is specifically useful in cases with remote control and configuration of remote fire control panels.
  • Page 134 UniPOS IFS7002 two signal loops 1.6.2. In „CAN Local SetUp CAN Local Parameters Parameters” enter the Remote object name:Fire Local Panel 001 parameters of the connection. Local Address: 1 Tout/Rcv.Nxt,[0.1s]: 60 Tout/Rcv.Ack,[0.1s]: 60 Tout/Rcv.Answ,[0.1s]: 70 Beep function counter: 0 Max.Errors Recv: 3 Max.Errors Send: 2...
  • Page 135 IFS7002 two signal loops The maximum number of UniPOS fire control panels connected to a CAN is 32. The name is important to the user only and an object with a local name, when added to the list of local objects, may receive another name, suitable according to the user.
  • Page 136 UniPOS IFS7002 two signal loops • A name of the remote SetUp Add new CAN object object can be assigned using the menu displayed above. The New CAN object is added to the local panel name is a random one (up to 20...
  • Page 137 UniPOS IFS7002 two signal loops • After a name has been SetUp Add new CAN object given to the connected object, New CAN object is added to the local panel go back to the main menu and select the option for parameter...
  • Page 138 UniPOS IFS7002 two signal loops • Adding communication SetUp Add new CAN object options to the object: Communication options include defining of the data New CAN object is added to the local panel which the Remote Panel will Total Connected CAN objects : 1 exchange in sections: o Fires and Faults;...
  • Page 139 UniPOS IFS7002 two signal loops o Screen “Lists, Archives” Remote Object Connection Options Lists & Archives Remote Object Name Fire Panel 002 Receive‘ListsInfo’Requests: Send‘ListsInfo’ Requests: Yes Receive‘ArchivesInfo’ Requests: Yes Send‘ArchivesInfo’ Requests: Yes Receive‘ClearArchives’ Requests: Yes Send‘ClearArchives’ Requests: Yes Mode DAY 13:28:25 Mon 04 Оct 2010...
  • Page 140 UniPOS IFS7002 two signal loops 1.6.3.2. Menu „Remove CAN object” FIRE CONTROL PANEL IFS7002 UniPOS View/Edit CAN object Add new CAN object Remove CAN object CAN Име локален обект CAN Локални параметри NetworkЛокална CAN Objects Local network Panel configuration Panel parameters Listsци...
  • Page 141 UniPOS IFS7002 two signal loops 1.6.3.3. Menu “View/Edit CAN objects” FIRE CONTROL PANEL IFS7002 UniPOS View/Edit CAN object Add new CAN object Remove CAN object CAN Име локален обект CAN Локални параметри NetworkЛокална CAN Objects Local network Panel configuration Panel parameters Listsци...
  • Page 142 UniPOS IFS7002 two signal loops Upon entering Menu „ Setup Zone 2 Maintenance remote zones Up/Zones/ Maintenance Remote Zones” the following window appears: Maintenance Remote Panels >> Add Remote Panel Disconnection Remote Panel Mode 13:28:25 Mon 04 Оct 2010 First add (select from the...
  • Page 143 UniPOS IFS7002 two signal loops Upon selecting a Control Add Remote Panel Setup zone 2 Panel (Example: Fire Control Panel 02), the number of the Remote Panels Remote panels NOTconnected in zone: 2 automatically reduced. >> Fire Control Panel 003...
  • Page 144 UniPOS IFS7002 two signal loops Upon selecting a Remote Maintenance remote panels Panel, there appears window for choosing the zone of the Remote Panel, which Zone 2 will be serviced from this Connected remote panel CAN address: 2 zone. Fire Control Panel 002 In the fileld „Maintenance...
  • Page 145 General features and considerations relevant to development of fire alarm networks based on IFS7002: IFS7002 allows connection of up to 32 devices in a network. In case of remote objects repeaters can be used, provided in each control panel as an option.

This manual is also suitable for:

Ifs7002-1Ifs7002-2

Table of Contents