Page 3
® ® Android™ mobile devices Apple is a trademark of Apple Inc , registered in the U S and other countries Note: Do not expose the PowerView Hub to direct sunlight Android is a trademark of Google Inc...
Page 4
Power Supply Connect Hub to Internet connected wireless router. Connect using an active Wi-Fi network: Connect power to Hub. Open the PowerView App on your mobile device and follow ® the on-screen instructions to properly connect to an active 1 Connect one end of the USB power cable to the USB power...
Page 5
Pairing your Hub with an existing Distribute Repeater(s) as needed. PowerView Shade Network. ® If you have already established a PowerView Shade Network ® between a PowerView ® Remote and PowerView shades, you should pair the Hub to the same network To pair the Hub to the same...
Page 6
Test signal to Repeater(s). Transfer your hub data (if needed). Press and hold the P button on the back of the PowerView If you have a Gen 1 Hub (above left) on your PowerView ® Shade ® The light on each Repeater should blink BLUE If the Repeater...
Page 7
® You’re ready to use the PowerView App. ® After a primary Hub has been paired to the PowerView ® Network, each subsequent Hub paired to the same network For more information about the setup and use of the will automatically be configured as a network access point...
Page 8
PowerView ® Motorization integrates with a variety of leading third-party control systems and devices. To learn more about integration, please contact your local Hunter Douglas dealer or visit: hunterdouglas com/operating-systems/powerview-motorization...
Page 9
Hunter Douglas Europe B.V. Piekstraat 2, 3071 EL Rotterdam, The Netherlands certify and declare under our sole responsibility that the PowerView ® • Check that the mobile device is on the same network as conforms with the essential requirements of the EMC directive 2004/108/EC and R&TTE directive 1999/5/EC.
Need help?
Do you have a question about the PowerView and is the answer not in the manual?
Questions and answers