Kyocera ECOSYS P4035dn Service Manual page 52

Maintenance
Description
The "Install MK" message means that maintenance kit should be replaced at fixed pages of print-
ing. The interval counter must be manually reset using this service item.
Maintenance kit MK-7300 : 500,000 images
Maintenance kit includes the following units:
Drum unit
Developer unit
Transfer roller assembly
Fuser unit
Paper feed roller assembly
Retard roller assembly
Purpose
To reset the life counter for maintenance kit.
Method
Drum unit (see page 1-5-17)
Developer unit (see page 1-5-14)
Transfer roller assembly (see page 1-5-21)
Fuser unit (see page 1-5-27)
Paper feed roller assembly (see page 1-5-9)
Retard roller assembly (see page 1-5-10)
Method
1. Enter the Service Setting menu.
2. Select [Maintenance] using the cursor up/down keys.
3. Press the OK key.
4. Select the [YES] using the left select key.
[Completed] is displayed.
The counter for each component is reset immediately.
Note:
Occurrences of resetting the maintenance kits are recorded on the service status page or event
log in number of pages at which the maintenance kit was replaced (see page 1-3-2, page 1-3-15
). This may be used to determine the possibility that the counter was errorneously or unintention-
ally reset.
1-3-11
2P7/2R0/3PN