Kyocera ECOSYS P4035dn Service Manual page 181

3. Release three hooks and then remove
the rear lower cover while pulling three
projection parts out.
4. Remove the seven screws and the rear
upper cover.
5. remove the connector of the fan motor
wires.
6. Remove the rear fan motor/
7. Check or replace the rear fan motor and
refit all the removed parts.
Projection parts
Rear lower cover
Rear upper cover
1-5-84
Hooks
Figure 1-5-154
Fan motor
wires
Connector
Screw
Screw
Screw
Figure 1-5-155
2P7/2R0/3PN
Rear upper
cover
Rear
fan motor
Screw
Screw
Screw
Screw