8. Remove the power cord cover by slid-
ing it.
9. Release the hook of the interface cover
and then remove during twisting it.
10. Remove two screws.
11. Release the hook A by twisting right
upper cover.
12. Release two hooks B by sliding the right
upper cover upward and then remove it.
Interface cover
Figure 1-5-44
Screw
Hook A
Front cover
Figure 1-5-45
1-5-25
2P7/2R0/3PN
Hook
Power cord
connector cover
Rear cover
Right upper cover
Screw
Hooks B