Kyocera ECOSYS P4035dn Service Manual page 179

8. Remove three screws.
9. Release two hooks by sliding the right
lower cover upward and then remove it.
10. Remove the connector of the power
source fan motor wires.
11. Release three hooks using flat-blade
screwdriver and then remove the power
source fan motor assembly.
12. Check or replace the power source fan
motor and refit all the removed parts.
Hooks
Screw
Power source
fan motor wires
Hook
1-5-82
Screw
Figure 1-5-150
Connector
Hooks
Power source
fan motor
assembly
Figure 1-5-151
2P7/2R0/3PN
Screw
Right lower
cover