Kyocera ECOSYS P4035dn Service Manual page 156

21. Remove the connector of the power
source fan motor wires.
22. Release three hooks using flat-blade
screwdriver and then remove the power
source fan motor assembly.
23. Stand the printer front side up.
24. Remove four screws each and then
remove the bottom plate 1 and the bot-
tom plate 2.
Power source
fan motor wires
Hook
Screw
Screw
Bottom plate 1
Screw
Screw
Bottom plate 2
Screw
1-5-59
Connector
Hooks
Power source
fan motor
assembly
Figure 1-5-109
Screw
Figure 1-5-110
2P7/2R0/3PN
Screw
Screw