Table of Contents
Advertisement
Main Oven Functions
Oven function
Off position
Minimum temperature
Heat settings
1)
1 - 9
Ignition
1) min - 130 °C, 1 - 140°C, 2 - 150°C, 3 -165°C, 4 - 180°C, 5 - 205°C, 6 - 220°C, 7 - 230°C, 8 - 245 °C, 9 - 260°C
Igniting the oven burners
CAUTION!
When the oven is active, the lid has
to be opened to avoid over-heating.
Keep the oven door open when you
ignite the burner.
Oven safety device:
The oven burners have a
thermocouple. It stops the gas flow,
if the flame goes out.
1. Open the oven door.
2. Push the knob for the main oven and turn it
counterclockwise to
oven burner.
3. Keep the knob pushed for equal or less
than 15 seconds to let the thermocouple
warm up. If not, the gas flow is interrupted.
4. After ignition release the knob, close the
oven door and turn the knob to set the
necessary heat setting.
WARNING!
Do not push the knob for more than
15 seconds. If the oven burner does
not light after 15 seconds, release
the knob, turn it back to off position
and try to light the oven burner again
after minimum 1 minute.
www.zanussi.com
The appliance is off.
To set the minimum temperature.
Heat settings for Conventional Cooking.
To activate the main oven.
to ignite the main
Application
CAUTION!
In the absence of electricity you can
ignite the oven burner without an
electrical device. In this case open
the oven door, put the flame near the
hole in the bottom of the oven cavity,
turn the knob to the spark position
and push it down. Keep the knob for
the oven functions pushed for equal
or less than 15 seconds to let the
thermocouple warm up.
If the oven burner accidentally goes
out, turn the knob for the oven
functions to the off position and try
to light the burner again after
minimum 1 minute.
Check if the burner holes are not
blocked.
Turning off the oven burners
To put out the flame, turn the knob to the off
position.
Cooling fan
When the appliance operates, the cooling fan
activates automatically to keep the surfaces of
the appliance cool. If you deactivate the
appliance, the cooling fan can continue to
operate until the appliance cools down.
If there is a defect in the cooling fan,
contact the Authorised Service
Centre.
Inserting the oven accessories
Put the slide-in accessories between the guide
bars in the top / main oven on the necessary
shelf position.
11
Advertisement
Table of Contents
