Single-System Nms With Two Drives - Lucent Technologies B-STDX Installation Manual

Network management station
Table of Contents

Advertisement

Beta Draft Confidential
32. At the Customize Disks dialog box, lay out files systems (based on guidelines
Note – Do not partition the disk(s) to be used for Sybase at this time. That procedure
is covered in
Use
Note – The second drive uses raw devices for the Sybase database. The installation
requires you to partition the second drive later in
Tasks."
Note – The recommended partition settings are only a guideline. The examples in the
table assume a 9-GB drive. If you are installing the operating system on a different
size drive, consult your UNIX System Administrator or call the Technical Assistance
Center. See
Table 2-1. Single-system NMS With Two Drives
Slice
Slice 0
Slice 1
Slice 2
Slice 3
Slice 4
Slice 5
Slice 6
Slice 7
a
For swap space, 1000-MB is a minimum. 2 x RAM is recommended.
B-STDX, CBX, and GX Network Management Station Installation Guide
provided in
Table 2-1 on page
and
Table 2-4 on page
2-8) and choose Ok.
Chapter 3, "Sybase Prerequisite Tasks."
Table 2-1
if you are installing a single-system NMS that has two drives.
"Technical Support"
File Systems Drive 1 (9-GB Drive)
Mount Point
/
1000-MB
swap
1000-MB
DO NOT CHANGE
DO NOT CHANGE
DO NOT CHANGE
/usr
1000-MB
/opt
Remaining unallocated space on drive after all
other settings have been configured; for
example, 6-GB for a 9-GB drive
DO NOT CHANGE
2-5,
Table 2-2 on page
Chapter 3, "Sybase Prerequisite
on
page
xviii.
Size
a
Installing Solaris 8
Solaris 8 Installation
2-6,
Table 2-3 on page
2-7,
7/12/042-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

CbxGx

Table of Contents